2 layers66.9 × 74.5 mm
2 layers188 × 96.5 mm
Arduino Nano Controller
TrainableTech/Custom_Arcade_PcbArduino based custom pcb design for arcade machine
- Size
- 188 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 38
- Pads
- 95
- Tracks, vias
- 245, 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Jun 2026
- Updated
- 24 Jun 2026
Overview
Arduino Nano Controller is an open-source printed circuit board by TrainableTech, from the TrainableTech/Custom_Arcade_Pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 188 × 96.5 mm with 20 parts on 38 nets, routed with 245 tracks and 12 vias.
Its parts include 9 connectors, 2 capacitors, 2 switches, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdCustom_Arcade_Pcb
Arduino based custom pcb design for arcade machine
The custom PCB layout is Arduino nano based/ Changes can be made for using Nano esp in future project
The basic design integrates the following subsystems into a unified board: The board includes a Timer pinout, a Sensor pin, StartB pin, 2 Relay outputs, an LEDs pinout, a ticket pinout, extra pinouts, and power pins. Software used: Kicad 9.0
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 10uF | Capacitor_THT:CP_Radial_Tantal_D8.0mm_P2.50mm | C1, C2 |
| 2 | Relay_SPDT | Relay_THT:Relay_SPDT_Schrack-RP-II-1-FormC_RM5mm | K1, K2 |
| 1 | 1000R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Barrel_Jack_12V | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | Battery | Battery:BatteryHolder_Eagle_12BH611-GR | BT1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | Led_Conn | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J2 |
| 1 | Pinout_Aduino | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-14P_1x14_P5.00mm | J9 |
| 1 | Relay_1out | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J5 |
| 1 | Relay_2out | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |
| 1 | Sensor_Conn | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J8 |
| 1 | Startbutton | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J3 |
| 1 | Tickets_conn | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J4 |
| 1 | Timer | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-05P_1x05_P5.00mm | J7 |
Questions
How big is the Arduino Nano Controller PCB?
It measures 188 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino Nano Controller use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino Nano Controller KiCad files?
From the TrainableTech/Custom_Arcade_Pcb repository on GitHub, at the commit this page was made from: the board is Arduino_Nano_Controller.kicad_pcb and its schematic Arduino_Nano_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino Nano Controller design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772