
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

A small Midi Keyboard PCB designed for Half Life Hack Club with buttons, sliders, potentiometer and mcu.
MidiTouchpad is an open-source printed circuit board by toyJig, from the toyJig/Midi-Keyboard-PCB repository on GitHub. It is a 2-layer board of 98.5 × 75.5 mm with 12 parts on 21 nets, routed with 230 tracks and 24 vias.
Its parts include 4 switches, 1 IC, 1 diode and 1 connector. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | SW_Push | Hackclub Footprints:Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 2 | SLIDER | Potentiometer_THT:Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 1 | Conn_01x07 | ToysLib:Midi_keys_7_with_blacks | J2 |
| 1 | NeoPixel_THT | LED_SMD:LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D2 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
| 1 | Waveshare ESP32-S3-ZERO | Hackclub Footprints:Waveshare ESP32-S3-Zero | U1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 98.5 × 75.5 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the toyJig/Midi-Keyboard-PCB repository on GitHub, at the commit this page was made from: the board is MidiTouchpad.kicad_pcb and its schematic MidiTouchpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask toyJig before reusing the design.