
Micarry 8ch camera
grufkork/micarray
This design is developed for the Build-Your-Own Ambisonic Microphone Arrays project, where you can also find more information regarding processing of the resulting recordings.

We wanted to create a low cost acoustic camera to give more people access to the technology. A commercial acoustic camera could cost $10,000+, which is generally way out of budget for most acoustical consultants or…
4-Channel Array V3 is an open-source printed circuit board by tortellini13, from the tortellini13/LambdaCam repository on GitHub. It is a 2-layer board of 35 × 35 mm with 21 parts on 17 nets, routed with 296 tracks and 21 vias.
It is built around the 74LCX125MTCX. Its parts include 8 resistors, 6 capacitors, 1 IC and 1 connector.
@tortellini13 and @n80n888 started this project as a senior capstone project while attending the University of Hartford. Coming into this project, neither of us had a lot of programming experience so a lot of what we've learned was though this project.
An acoustical camera is a device that receives sound from an array of microphones and estimates the direction in which the sound is arriving. The acoustical camera then overlays a heatmap of the incoming sound data over a regular camera feed.
We wanted to create a low cost acoustic camera to give more people access to the technology. A commercial acoustic camera could cost $10,000+, which is generally way out of budget for most acoustical consultants or individuals.
More information about how to build the project is to come...
...
...
More information about contributing to the project is to come...
...
...
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 ohms | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5, C6 |
| 4 | 33 ohms | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | IM69D120V01XTSA1 | IM69D120V01XTSA1:XDCR_IM69D120V01XTSA1 | MK1, MK2, MK3, MK4 |
| 2 | 1uF | Resistor_SMD:R_0603_1608Metric | C1, C3 |
| 1 | 74LCX125MTCX | 74LCX125MTCX:SOP65P640X120-14N | U1 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | LOGO | kicad libs:uhartacslogo3 | G*** |

grufkork/micarray
This design is developed for the Build-Your-Own Ambisonic Microphone Arrays project, where you can also find more information regarding processing of the resulting recordings.

lwa-project/zcu102_sync_board
Daughter board for a ZCU102 that allows for synchonization signals to be passed in/out

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
It measures 35 × 35 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the 74LCX125MTCX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tortellini13/LambdaCam repository on GitHub, at the commit this page was made from: the board is docs/CAD/Electrical/4-Channel Array V3/4-Channel Array V3.kicad_pcb and its schematic docs/CAD/Electrical/4-Channel Array V3/4-Channel Array V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tortellini13 before reusing the design.