
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

基板名刺用リポジトリ
PCB Contact Card is an open-source printed circuit board by torica-org, from the torica-org/26th_PCB_Contact_Card repository on GitHub. It is a 2-layer board of 90 × 54 mm with 6 parts on 3 nets, routed with 15 tracks and 2 vias.
Its parts include 1 capacitor, 1 resistor and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | L | lib:NFC_COIL_36.7x36.7_3uH | ANT |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LOGO | PCB_BusinessCard_lib:TORICA_LOGO | G*** |
| 1 | LOGO | PCB_BusinessCard_lib:torica_official | G*** |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 90 × 54 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the torica-org/26th_PCB_Contact_Card repository on GitHub, at the commit this page was made from: the board is KiCad/PCB_Contact_Card.kicad_pcb and its schematic KiCad/PCB_Contact_Card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask torica-org before reusing the design.