Skip to the content
2 layers88.7 × 55.1 mmAanitasomittari, the printed circuit board in 3D

Sound level meter made with own pcb. I used kicad to make the pcb and to manufacture it i used milling. For the software i used Arduino IDE. The case was made using the Autodesk Inventor.

Size
88.7 × 55.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
28
Pads
55
Tracks, vias
78, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 May 2026
Updated
5 May 2026

Overview

Aanitasomittari is an open-source printed circuit board by tonihata, from the tonihata/Sound-Level-Meter repository on GitHub. It is a 2-layer board of 88.7 × 55.1 mm with 16 parts on 28 nets, routed with 78 tracks and 0 vias.

It is built around the ATMEGA328-PU. Its parts include 3 resistors, 3 diodes, 2 capacitors, 2 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Sound-Level-Meter

Sound level meter made with own pcb. I used kicad to make the pcb and to manufacture it i used milling. For the software i used Arduino IDE. The case was made using the Autodesk Inventor.

I used the ATMEGA328P -microchip and the MAX4466 -microphone.

1000023979 1000024416 1000024418

Parts

16
QtyValueFootprintReferences
3220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3
222 pFCapacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mmC1, C2
15VTerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmBT1
1ATmega328-PPackage_DIP:DIP-28_W7.62mmU2
1CrystalCrystal:Crystal_HC49-4H_VerticalY1
1GREEN_LEDLED_THT:LED_D5.0mmD1
1RED_LEDLED_THT:LED_D5.0mmD3
1YELLOW_LEDLED_THT:LED_D5.0mmD2
1~aanitasomittari-backups:max4466U1

The 12 most common of 16 parts.

Similar boards

  • 2 layers104.9 × 75.2 mmHandipi kb, the printed circuit board in 3D

    Handipi kb

    brickbots/HandiPi

    Handheld RPI4 based computer with keyboard and display

    95 parts814MIT
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers50 × 50 mmAvrcraft poed, the printed circuit board in 3D

    Avrcraft poed

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    58 parts471
  • 2 layers284.7 × 94.2 mmLumberjack, the printed circuit board in 3D

    Lumberjack

    peej/lumberjack-keyboard

    5x12 ortholinear through-hole component keyboard PCB for standard 60% cases

    165 parts403MIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98

Questions

How big is the Aanitasomittari PCB?

It measures 88.7 × 55.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Aanitasomittari use?

16 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aanitasomittari KiCad files?

From the tonihata/Sound-Level-Meter repository on GitHub, at the commit this page was made from: the board is pcb/aanitasomittari.kicad_pcb and its schematic pcb/aanitasomittari.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aanitasomittari design in my own project?

Its repository states no licence, so its author keeps all rights: ask tonihata before reusing the design.