Skip to the content
4 layers52.2 × 52.9 mmOptical, the printed circuit board in 3D

This project implements a model-based proprioception system for soft robots using embedded capacitive strain sensors, inspired by the Flex-2P6D sensor design from Feliu-Talegon et al.

Size
52.2 × 52.9 mm
Copper layers
4
Thickness
1.04 mm
Parts
30
Nets
29
Pads
100
Tracks, vias
119, 166
Pours
34
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Feb 2026
Updated
25 May 2026

Overview

Optical is an open-source printed circuit board by tongtongwang86, from the tongtongwang86/Shape_sensing_research repository on GitHub. It is a 4-layer board of 52.2 × 52.9 mm with 30 parts on 29 nets, routed with 119 tracks and 166 vias.

It is built around the APDA3020P3C-P22 and FFC2B28-12-G. Its parts include 10 resistors, 9 capacitors, 6 transistors, 3 diodes and 1 IC.

Main components

2

README

README.md

Capacitive 6DOF Strain Sensor for Soft Robot Shape Reconstruction

This project implements a model-based proprioception system for soft robots using embedded capacitive strain sensors, inspired by the Flex-2P6D sensor design from Feliu-Talegon et al. ("Advancing Soft Robot Proprioception Through 6D Strain Sensors Embedding", Soft Robotics 2025). The approach uses a two-plate capacitive sensor that measures relative displacement and rotation between plates to compute the full 6D strain (twist, bending in two axes, axial stretch, and shear in two axes) at discrete points along the robot body. These strain measurements are then integrated using the Geometric Variable-Strain (GVS) model based on SE(3) Lie group kinematics to reconstruct the complete 3D shape of the soft manipulator. This repository contains the KiCad PCB design files for the sensor board (featuring the AD7147 capacitance-to-digital converter) and a simulation suite that generates synthetic strain data and visualizes the resulting 3D shape reconstruction in MATLAB.

Initial "Simulation" Results

Shape Reconstruction 1

Shape Reconstruction 2

PCB Design

Sensor PCB

Parts

30
QtyValueFootprintReferences
62.2Klibrary:0402R1, R2, R4, R5, R6, R7
6APDA3020P3C-P22library:APDA3020P3C-P22Q1, Q2, Q3, Q4, Q5, Q6
3100uFCapacitor_SMD:C_0402_1005MetricC1, C5, C8
310uFCapacitor_SMD:C_0402_1005MetricC6, C7, C9
3220rlibrary:0402R8, R9, R10
3LEDlibrary:APDA3020P3C-P22D1, D2, D3
21uFCapacitor_SMD:C_0402_1005MetricC2, C4
12.2KResistor_SMD:R_0201_0603MetricR3
14.7nFCapacitor_SMD:C_0402_1005MetricC3
1ADS1262IPWRlibrary:SOP65P640X120-28NU1
1FFC2B28-12-Glibrary:GCT_FFC2B28-12-GJ1

More from tongtongwang86/Shape_sensing_research

2
  • 4 layers6.2 × 4.7 mmOptical, the printed circuit board in 3D

    Optical

    tongtongwang86/Shape_sensing_research

    This project implements a model-based proprioception system for soft robots using embedded capacitive strain sensors, inspired by the Flex-2P6D sensor design from Feliu-Talegon et al.

    16 parts
  • 2 layers26.2 × 11.2 mmHeaderboard, the printed circuit board in 3D

    Headerboard

    tongtongwang86/Shape_sensing_research

    This project implements a model-based proprioception system for soft robots using embedded capacitive strain sensors, inspired by the Flex-2P6D sensor design from Feliu-Talegon et al.

    2 parts

Similar boards

  • 2 layers48 × 50 mmKERISE, the printed circuit board in 3D

    KERISE

    kerikun11/micromouse-kerise-v6

    Mircro Mouse KERISE v6

    128 parts7
  • 2 layers90.8 × 73.9 mmGPS Compass Arrow, the printed circuit board in 3D

    GPS Compass Arrow

    bismarx-v1/GPS-Compass

    The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one

    156 parts1
  • 2 layers70.5 × 222.1 mmPagtingin Final Panelized, the printed circuit board in 3D

    Pagtingin Final Panelized

    Niqtan/Pagtingin-to-Highway

    Version of Pagtingin Repo for Hack Club's Highway Program

    460 partsMIT
  • 2 layers77.2 × 92.9 mmPackmate, the printed circuit board in 3D

    Packmate

    r-best/packmate

    76 parts
  • 4 layers130 × 40 mmPumaTX MB HW01, the printed circuit board in 3D

    PumaTX MB HW01

    PumaFPV/PumaTX

    DIY FPV Remote controller based on the one from the mavic

    90 parts4MIT
  • 4 layers55.5 × 65 mmJitx design, the printed circuit board in 3D

    Jitx design

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    30 parts5.1kGPL-3.0
  • 4 layers23 × 53 mmEasyduino STM32F103, the printed circuit board in 3D

    Easyduino STM32F103

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    30 parts755CERN-OHL-P-2.0

Questions

How big is the Optical PCB?

It measures 52.2 × 52.9 mm and has 4 copper layers, 1.04 mm thick.

What parts does the Optical use?

30 parts, built around the APDA3020P3C-P22 and FFC2B28-12-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Optical KiCad files?

From the tongtongwang86/Shape_sensing_research repository on GitHub, at the commit this page was made from: the board is optical6dof-evaluationboard/Optical.kicad_pcb and its schematic capacitive6dofsensor/capacitive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Optical design in my own project?

Its repository states no licence, so its author keeps all rights: ask tongtongwang86 before reusing the design.