2 layers56 × 102.5 mm
2 layers
Partial routekicad pcb
tomqdev/modular-synthRepository for the ((very) long term) modular synth project
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 40
- Pads
- 108
- Tracks, vias
- 141, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Mar 2019
- Updated
- 6 May 2019
Overview
Partial routekicad pcb is an open-source printed circuit board by tomqdev, from the tomqdev/modular-synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 41 parts on 40 nets, routed with 141 tracks and 0 vias.
It is built around the CA3080A and TL072. Its parts include 23 resistors, 7 connectors, 6 capacitors, 3 ICs and 1 diode.
Main components
2README
README.mdmodular-synth
Repository for the ((very) long term) modular synth project
Modules
So far the only module that has been routed is the thomas-henry vca1.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R9, R12, R13, R14, R15, R16 |
| 5 | 100K | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | R18-PAD1, R19-PAD2, R20-PAD3, R21-ATTEN1, R22-INITIAL1 |
| 5 | AudioJack2 | kicad_footprints:PinHeader_1x02_P2.54mm_Vertical_audio | J1, J2, J3, J4, J5 |
| 3 | 0.22uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C9 |
| 2 | 11k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 1 | 100k | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | R17-OFFSET-TRIM1 |
| 1 | 10K | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | R4-LEVEL1 |
| 1 | 10pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 2.2uF NP | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C12 |
| 1 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 22r | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | 330k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | 51k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | CA3080 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | LINE OUT | kicad_footprints:PinHeader_1x02_P2.54mm_Vertical_audio | J7 |
| 1 | MAX OUT | kicad_footprints:PinHeader_1x02_P2.54mm_Vertical_audio | J6 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | TL071 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
Questions
What parts does the Partial routekicad pcb use?
41 parts, built around the CA3080A and TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Partial routekicad pcb KiCad files?
From the tomqdev/modular-synth repository on GitHub, at the commit this page was made from: the board is vca/thomas-henry-vca/vca1/partial_routekicad_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Partial routekicad pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers228 × 100 mm
AMP MA
pivikd/AMP-MA
AMP-AM (standing for Modus Aequale, signifying a rhythmic, ideal tone and modular structure) is an open-source, transistor-based guitar combo amplifier project.
148 parts1CERN-OHL-S-2.0 - 2 layers60.6 × 111.8 mm
- 2 layers80.9 × 104.5 mm
SKVCF
MatthewATaylor/Modular-Synth-Hardware
KiCad schematics and PCB layouts for my modular synth
54 parts11MIT - 2 layers80.8 × 112.5 mm
- 2 layers55 × 105 mm
- 2 layers
- 2 layers161.8 × 283.7 mm
