
Memory loader
TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

Simple As Possible (SAP) 8-bit computer with a modular PCB design
Loader is an open-source printed circuit board by TomNisbet, from the TomNisbet/sap-plus repository on GitHub, published under the MIT licence. It is a 2-layer board of 102 × 96 mm with 18 parts on 109 nets, routed with 207 tracks and 21 vias.
It is built around the 74HC595 and 74LS00SC. Its parts include 4 resistors, 4 ICs, 3 capacitors, 3 connectors and 2 diodes. It belongs with the retro computing and games boards of this library.
created with KiCad 8.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U1, U3 |
| 2 | Bus | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Vertical | J1, J2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1N5818 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Arduino Nano | Module:Arduino_Nano | A1 |
| 1 | DM-OLED096-636 | myDisplays:MODULE_DM-OLED096-636-27 | U4 |
| 1 | LDR Active | LED_THT:LED_D5.0mm | D2 |
| 1 | R-BLU | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | to Microcode | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design


TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design

TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design


tebl/RC-ONE
A recreation of the MOS KIM-1 microcomputer, the start of the Commodore-line of computers. Complete with hex keypad, six digit displays and a lot of 8-bit fun!



jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos


Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
It measures 102 × 96 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 74HC595 and 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TomNisbet/sap-plus repository on GitHub, at the commit this page was made from: the board is schematics/loader/loader.kicad_pcb and its schematic schematics/ab-register/ab-register.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).