

- Size
- 30 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 23
- Pads
- 90
- Tracks, vias
- 217, 11
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Aug 2023
- Updated
- 22 Dec 2024
Overview
PIR is an open-source printed circuit board by Tomas0015, from the Tomas0015/System-Q repository on GitHub. It is a 2-layer board of 30 × 90 mm with 30 parts on 23 nets, routed with 217 tracks and 11 vias.
It is built around the WT8266-S1, AP63203WU and BC846, with the BC857 among its other parts. Its parts include 7 resistors, 5 capacitors, 4 connectors, 3 transistors and 2 ICs.
Main components
4WT8266-S1
SMD-40℃~+85℃ -98dBm 2.4GHz 215mA 3V~3.6V 56mA ESP8266 UART、SDIO、SPI、I2C、GPIO SMD WiFi Modules ROHSWireless-tagWiFi ModulesAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersBC846
SOT-23-65℃~+150℃ 1 NPN 100mA 110 15nA 250mW 400mV 65V 6V 770MHz NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
README
README.mdSystem-Q
System Q is an open source security system, based on the ESP microcontroller, with wireless and wired bus capabilities.
I like cheese
We hate cloud with a passion so there will not be a cloud integration developed by us, the most you will get is a GSM modem sending out SMS messages.
Central control unit
-doesn't actually control anything, only contains a power supply and a battery.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C3, C5 |
| 2 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10u 50V | Capacitor_SMD:CP_Elec_5x5.3 | C1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4u7 | Inductor_SMD:L_Ferrocore_DLG-0504 | L1 |
| 1 | 820 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | BATT_EXT | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J2 |
| 1 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BUS | TerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mm | J1 |
| 1 | Buzzer | LPT2270AS buzzer:LPT2270AS | BZ1 |
| 1 | FLASH/CONF | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J4 |
| 1 | IO12 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | IO5 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | LED - R | LED_THT:LED_D5.0mm | D1 |
| 1 | PIR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | WT8266-S1 | WT8266:WT8266-S1 | U2 |
| 1 | buzzer test | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | tamper switch | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | tamper test | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
More from Tomas0015/System-Q
4- 2 layers50 × 100 mm

- 2 layers50 × 80 mm

- 2 layers50 × 80 mm

- 2 layers60 × 55 mm

Similar boards
- 2 layers60 × 50 mm

Discrete PLL
adasbl/Discrete-PLL-pcb
Discrete PLL (Phase-Locked Loop) design implemented in KiCad
59 parts - 2 layers57 × 57.3 mm

- 2 layers85 × 123.8 mm

ISCAS25 Blinker
juamonsan/ISCAS25_PCB
PCB that also serves as a pen holder in conmemoration of ISCAS 2025
55 partsCC0-1.0 - 2 layers75 × 50 mm

ParaPRZEKAZNIK
SP8EBC/ParaPRZEKAZNIK-pcb
SPDT relays board controled by single TTL input, with an option for Modbus-RTU MCU module, with PT1000 temperature measurement
82 parts - 2 layers60 × 50 mm

- 2 layers124 × 40 mm

RedFIS
tothpetiszilard/a3_8p_redFIS
Hacking into Audi A3 8P Driver Information System
77 parts15AGPL-3.0 - 4 layers53 × 75.9 mm

- 2 layers43 × 35 mm

LYFT CTRL
mgkoenig/lyft
LYFT is a sophisticated remote control for your IKEA BEKANT desk.
43 parts88GPL-3.0
Questions
How big is the PIR PCB?
It measures 30 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIR use?
30 parts, built around the WT8266-S1, AP63203WU, BC846 and BC857. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIR KiCad files?
From the Tomas0015/System-Q repository on GitHub, at the commit this page was made from: the board is PIR/ALT/PIR.kicad_pcb and its schematic BATT/batt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIR design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tomas0015 before reusing the design.