2 layers100 × 100 mm
Main pcb hw5
herzmx/cartreader
A shield for the Arduino Mega that can back up video game cartridges.
31 parts2GPL-3.0
2 layers100 × 100 mm
Main pcb hw5
tolihub/cartreaderA shield for the Arduino Mega that can back up video game cartridges.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 94
- Pads
- 265
- Tracks, vias
- 1,134, 107
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Jul 2023
- Updated
- 13 Jul 2023
Overview
Main pcb hw5 is an open-source printed circuit board by tolihub, from the tolihub/cartreader repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 33 parts on 94 nets, routed with 1,134 tracks and 107 vias.
It is built around the TPS2113PW. Its parts include 10 connectors, 4 capacitors, 2 resistors, 2 switches and 1 IC.
Main components
1README
README.md
Open Source Cartridge Reader
This project represents a community-driven effort to provide an easy to build and easy to modify cartridge dumper.
Its main purpose is to dump a video game's ROM and save file to an SD card without the need of a PC.
For any questions you can use the Discussions and/or Issues section here on Github or visit the accompanying thread in the Arduino Forum, where you can reach most of the devs directly.
Also be sure to check the guides in the Wiki too.
Happy making. 🔧🔨😊
Features:
- Modular design
- Stand-alone operation
- Easy to modify open-source code
- Portable when used together with a power bank
Supported Systems:
- NES/Famicom/Family Basic
- SNES/Super Famicom (including SF Memory and Satellaview)
- N64 (including Controller Pak and Gameshark)
- Game Boy Color (including GB Memory)
- Game Boy Advance
- Sega Mega Drive/Genesis
- Sega Master System
Supported with adapters:
- Virtual Boy
- Sega Game Gear
- Sega Mark III
- Sega SG-1000
- Sega Cards
- PC engine/TG16
- WonderSwan (Color)
- NeoGeo Pocket (Color)
- Intellivision
- ColecoVision
- Benesse Pocket Challenge W
- Benesse Pocket Challenge V2
- Watara Supervision
- Atari 2600
- Emerson Arcadia 2001
- Fairchild Channel F
- Magnavox Odyssey 2
- Super A'Can
- MSX
- Pokemon Mini
- Casio Loopy
Open Source Licenses:
- Software(everything in Cart_Reader folder) = GPL v3
- Hardware(everything in hardware folder) = CC BY 4.0
- Documentation(everything in the Wiki) = CC0 1.0
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Screw_Terminal_01x01 | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | M2_1, M2_2, M2_3, M2_4, M2_5, M2_6, M2_7, M2_8, M2_9 |
| 2 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3 |
| 1 | 10 uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 550 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 5V USB | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | CART SLOT BOTTOM ROW | Connector_PinSocket_2.54mm:PinSocket_1x36_P2.54mm_Vertical | J4 |
| 1 | CART SLOT TOP ROW | Connector_PinSocket_2.54mm:PinSocket_1x38_P2.54mm_Vertical | J3 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J7 |
| 1 | EXP1 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 1 | EXP2 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8 |
| 1 | GBA_Slot | !sanni:GBA-SLOT-B | J10 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | !OSCR:Logo | G*** |
| 1 | MEGA BOTTOM | Connector_PinSocket_2.54mm:PinSocket_2x16_P2.54mm_Vertical | J2 |
| 1 | MEGA SIDE | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J5 |
| 1 | MEGA TOP | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J1 |
| 1 | POWER | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2 |
| 1 | TPS2113PW | Personal:Texas_Instruments-TPS2113PW-Level_A | U1 |
| 1 | Testpoints 1 2 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | Testpoints 3 4 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | VOLTAGE | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | powered by VCC | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
Questions
How big is the Main pcb hw5 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main pcb hw5 use?
33 parts, built around the TPS2113PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main pcb hw5 KiCad files?
From the tolihub/cartreader repository on GitHub, at the commit this page was made from: the board is hardware/main_pcb_hw5/main_pcb_hw5.kicad_pcb and its schematic hardware/cic_adapter/D411_F411_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main pcb hw5 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers15.4 × 10 mm
VSelect
Lesserkuma/sanni_cartreader
A shield for the Arduino Mega that can back up video game cartridges.
10 parts1GPL-3.0 - 2 layers100 × 100 mm
Main pcb hw5
gemarcano/cartreader
A shield for the Arduino Mega that can back up video game cartridges.
31 partsGPL-3.0 - 2 layers87 × 55.9 mm
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0