
PowerControlModule
tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO

H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
PowerModule is an open-source printed circuit board by tokai-student-rocket-project, from the tokai-student-rocket-project/H-62-Avionics repository on GitHub. It is a 2-layer board of 90 × 70 mm with 47 parts on 35 nets, routed with 264 tracks and 139 vias.
It is built around the DF1B-2S-2.5R, AO3401A and DF11-8DP-2DS(52), with the DF51-2P-2DS(20) among its other parts. Its parts include 16 resistors, 7 capacitors, 7 connectors, 4 ICs and 4 diodes.
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
すばる1.2 の機能を引き継ぎつつ海打上げ実験用に改良を加えました
資料を格納するディレクトリ
KiCADのプロジェクトファイルを格納するディレクトリ
ライブラリを格納するディレクトリ
Lib_ から始まるライブラリはラッパーライブラリとなっています
ソースコードを格納するディレクトリ
Flight : 搭載計器のソースコード
Ground : 地上局のソースコード
LogDumper : ログ読み出しのソースコード
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R6, R14, R15 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C6 |
| 4 | DF1B-2S-2.5R | TSRP_Connector_Hirose:DF1B-2S-2.5R | J2, J3, J4, J6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 0.1R | Resistor_SMD:R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | R2, R5, R16 |
| 3 | 2.4kR | Resistor_SMD:R_0603_1608Metric | R7, R9, R10 |
| 3 | INA219BxDCN | Package_TO_SOT_SMD:SOT-23-8 | U1, U2, U4 |
| 3 | Orange | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 5.6kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | DF11-8DP-2DS | TSRP_Connector_Hirose:DF11-8DP-2DS | J5, J7 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 100kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 10kR | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | TH1 |
| 1 | 3.3kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 33uF | Capacitor_SMD:CP_Elec_6.3x5.9 | C5 |
| 1 | DF51-2P-2DS | TSRP_Connector_Hirose:DF51-2P-2DS | J8 |
| 1 | SR54F | Diode_SMD:D_SMB_Handsoldering | D4 |
| 1 | ~ | TSRP_IC:StrawberryLinux_LTC3118 | U3 |

tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO


tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO

tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO


tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO



tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO



Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.


polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.

It measures 90 × 70 mm and has 2 copper layers, 1.6 mm thick.
47 parts, built around the DF1B-2S-2.5R, AO3401A, DF11-8DP-2DS(52) and DF51-2P-2DS(20). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tokai-student-rocket-project/H-62-Avionics repository on GitHub, at the commit this page was made from: the board is KiCAD/PowerModule/PowerModule.kicad_pcb and its schematic KiCAD/18650BatteryModule/18650BatteryModule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tokai-student-rocket-project before reusing the design.