
DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed

Qtpy iomidi is an open-source printed circuit board by todbot, from the todbot/qtpy_iomidi repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 69.9 × 43.2 mm with 26 parts on 31 nets, routed with 158 tracks and 7 vias.
It is built around the H11L1. Its parts include 8 resistors, 4 diodes, 4 connectors, 2 ICs and 2 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R6, R7, R8 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | LED1, LED2, LED3 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | AudioJack4 | todbot_stuff:Jack_3.5mm_PJ320D_Horizontal | J1, J2 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 10.0 QTJ6.3 | easyeda2kicad:USB-A-SMD_10.0-QTJ6.3 | USB1 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 33 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | H11L1 | Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads | U2 |
| 1 | OLED-128x64 | todbot_stuff:OLED-128x64-w_header | J5 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles | SW2 |
| 1 | SW_Omron_B3FS | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | ~ | todbot_eagle2023:QTPY_TH_HEADERSOCKET | U1 |

bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

chris-jh/mt32-pi-midi-hat
A Raspberry Pi Midi Hat for the project mt32-pi by Dale Whinham (https://github.com/dwhinham/mt32-pi)


todbot/pico_test_synth
Simple board to help make synths with Raspberry Pi Pico/Pico2 and PCM5102 I2S DAC

grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.

SloeComputers/picoX7
Software simulation of the Yamaha DX7 with a MIDI interface for the Raspberry Pi Pico

dchwebb/Oscar
Eurorack 3 Channel Oscilloscope based on ARM STM32F446 MCU
It measures 69.9 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the H11L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the todbot/qtpy_iomidi repository on GitHub, at the commit this page was made from: the board is schematics/qtpy_iomidi/qtpy_iomidi.kicad_pcb and its schematic schematics/qtpy_iomidi/qtpy_iomidi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).