Skip to the content
2 layers11.2 × 46.4 mmKL27Z breakout, the printed circuit board in 3D

KL27Z breakout

tmk/KL27Z_breakout2

300mil breakout PCB for QFN32 Kinetis KL27Z

Size
11.2 × 46.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
32
Pads
91
Tracks, vias
337, 28
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
1 Aug 2016
Updated
21 Sep 2016

Overview

KL27Z breakout is an open-source printed circuit board by tmk, from the tmk/KL27Z_breakout repository on GitHub. It is a 2-layer board of 11.2 × 46.4 mm with 14 parts on 32 nets, routed with 337 tracks and 28 vias.

It is built around the MKL27Z256VFM4. Its parts include 5 connectors, 3 capacitors, 2 resistors, 2 switches and 1 IC. It belongs with the interfaces and adapters boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

1

Parts

14
QtyValueFootprintReferences
233keyboard_parts:R_1608R1, R2
2CONN_01X06keyboard_parts:Pin_Header_Straight_1x06P1, P4
2CONN_01X08keyboard_parts:Pin_Header_Straight_1x08P2, P3
2SW_PUSHkeyboard_parts:SW_ALPS_SKRPSW1, SW2
10.1ukeyboard_parts:C_1608C4
12.2ukeyboard_parts:C_1608C2
14.7ukeyboard_parts:C_1608C1
1MKL27Z256VFM4Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mmU1
1SOLDER_JUMPERkeyboard_parts:SOLDER_JUMPER_2_WIREDSJ1
1USB_mini_micro_Bkeyboard_parts:USB_microBJ1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the KL27Z breakout PCB?

It measures 11.2 × 46.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KL27Z breakout use?

14 parts, built around the MKL27Z256VFM4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KL27Z breakout KiCad files?

From the tmk/KL27Z_breakout repository on GitHub, at the commit this page was made from: the board is KL27Z_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the KL27Z breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask tmk before reusing the design.