Skip to the content
2 layers43.5 × 50.5 mmLed panel 3, the printed circuit board in 3D

Led panel 3

tmarhguy/alu48

8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

Size
43.5 × 50.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
37
Pads
104
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
21 Jul 2025
Updated
5 Jun 2026

Overview

Led panel 3 is an open-source printed circuit board by tmarhguy, from the tmarhguy/alu repository on GitHub, published under the MIT licence. It is a 2-layer board of 43.5 × 50.5 mm with 35 parts on 37 nets.

Its parts include 26 transistors, 4 resistors, 4 diodes and 1 connector. It belongs with the retro computing and games boards of this library.

README

schematics/kicad/boards/flags/README.md

Flags Generation Board

Comparison and status flag generation


Function

Generate 4 flags for ALU status and comparison:

  • LESS: A < B (magnitude comparison)
  • EQUAL: A == B (equality check)
  • POSITIVE: OUT > 0 (positive result)
  • COUT: Carry out (from adder)

Schematic

![Flags Schematic](../../../../media/schematics photos svg/flags.svg) Flags generation circuit


Flag Implementations

EQUAL Flag (~100T)

Function: Detect A == B

Logic:

text
EQUAL = ~((A[7] XOR B[7]) | (A[6] XOR B[6]) | ... | (A[0] XOR B[0]))

Implementation:

  • 8× XOR gates (96T)
  • 8-input NOR gate (16T)

LESS Flag (~120T)

Function: Detect A < B

Logic: Cascaded priority comparison (MSB first)

Implementation: ~120T comparator logic

POSITIVE Flag (~20T)

Function: Detect OUT > 0

Logic:

text
NOT_ZERO = OUT[7] | ... | OUT[0]
POSITIVE = ~OUT[7] & NOT_ZERO

COUT Flag (0T)

Function: Pass carry from adder

Implementation: Direct wire


Signals

Inputs:

  • A[7:0], B[7:0] - For comparison
  • OUT[7:0] - For POSITIVE detection
  • COUT_IN - From adder

Outputs:

  • LESS, EQUAL, POSITIVE, COUT

Last Updated: 2026-01-16

Parts

35
QtyValueFootprintReferences
13NMOSPackage_TO_SOT_SMD:TSOT-23Q203, Q204, Q205, Q208, Q301, Q304, Q306, Q401, Q404, Q406, Q502, Q602, Q603
13PMOSPackage_TO_SOT_SMD:TSOT-23Q201, Q202, Q206, Q207, Q302, Q303, Q305, Q402, Q403, Q405, Q501, Q601, Q604
4300Resistor_SMD:R_0805_2012MetricR101, R102, R103, R104
1Conn_01x10_PinConnector_Harwin:Harwin_Gecko-G125-FVX1005L0X_2x05_P1.25mm_VerticalJ101
1LED20LED_THT:LED_D3.0mmD104
1LED21LED_THT:LED_D3.0mmD102
1LED22LED_THT:LED_D3.0mmD101
1LED23LED_THT:LED_D3.0mmD103

More from tmarhguy/alu

12
  • 2 layers110 × 117 mmAdd sub, the printed circuit board in 3D

    Add sub

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    200 parts48MIT
  • 2 layers101 × 68 mmLed panel 1, the printed circuit board in 3D

    Led panel 1

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    131 parts48MIT
  • 2 layers78.5 × 68.5 mmLed panel 2, the printed circuit board in 3D

    Led panel 2

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    129 parts48MIT
  • 2 layers98.5 × 95.5 mmMain logic, the printed circuit board in 3D

    Main logic

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    122 parts48MIT
  • 2 layers59 × 63 mmMain control, the printed circuit board in 3D

    Main control

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    42 parts48MIT
  • 2 layers41 × 35.5 mmFlags, the printed circuit board in 3D

    Flags

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    26 parts48MIT
  • 2 layers77.5 × 43 mmGate xnor 2in, the printed circuit board in 3D

    Gate xnor 2in

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    19 parts48MIT
  • 2 layers72 × 42.5 mmGate xor 2in, the printed circuit board in 3D

    Gate xor 2in

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    19 parts48MIT
  • 2 layersGate and 4in, the printed circuit board in 3D

    Gate and 4in

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    10 parts48MIT
  • 2 layers42.5 × 32.5 mmGate and 2in, the printed circuit board in 3D

    Gate and 2in

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    9 parts48MIT
  • 2 layers57.5 × 36 mmGate or 2in, the printed circuit board in 3D

    Gate or 2in

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    9 parts48MIT
  • 2 layers18.5 × 32.8 mmGate nand 2in, the printed circuit board in 3D

    Gate nand 2in

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    7 parts48MIT

Similar boards

  • 2 layers97.2 × 59.1 mmArmLEDsPrototype, the printed circuit board in 3D

    ArmLEDsPrototype

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    35 parts915
  • 2 layers62 × 42 mmMod cell 0 02, the printed circuit board in 3D

    Mod cell 0 02

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    35 parts756
  • 2 layers75 × 26 mmDIY detector electron variant, the printed circuit board in 3D

    DIY detector electron variant

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    35 parts558BSD-2-Clause
  • 2 layers45 × 25 mmReCamera Basically Board, the printed circuit board in 3D

    ReCamera Basically Board

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    35 parts495Apache-2.0
  • 2 layers160.8 × 24.4 mmHUD VID RCD PANEL, the printed circuit board in 3D

    HUD VID RCD PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    35 parts431
  • 2 layers75 × 50 mmBackplane tester, the printed circuit board in 3D

    Backplane tester

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    35 parts397Apache-2.0
  • 2 layers50 × 20.5 mmOtterIron PRO Top, the printed circuit board in 3D

    OtterIron PRO Top

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    35 parts321
  • 2 layers50.5 × 67.1 mmHackheld Vega, the printed circuit board in 3D

    Hackheld Vega

    SpacehuhnTech/HackHeld

    Hackable Handheld

    35 parts277

Questions

How big is the Led panel 3 PCB?

It measures 43.5 × 50.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led panel 3 use?

35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led panel 3 KiCad files?

From the tmarhguy/alu repository on GitHub, at the commit this page was made from: the board is schematics/kicad/boards/led_panel/led_panel_3/led_panel_3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led panel 3 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).