
Circuit tap
gcoonrod/circuit-tap
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

Single Board Computer with Z80 for CP/M
Sbcz80cpm is an open-source printed circuit board by tkhshmsy, from the tkhshmsy/sbcz80cpm repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 100 mm with 42 parts on 67 nets, routed with 695 tracks and 44 vias.
It is built around the ATMEGA4809-PF, 74LS32SC and AS6C4008-55PCN. Its parts include 10 capacitors, 8 connectors, 5 resistors, 4 ICs and 1 diode. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.
Single Board Computer with Z80 for CP/M


| Ref | Name | Qty | Description | Package | Link |
|---|---|---|---|---|---|
| U1 | Z80 | 1 | Z80 CPU | DIP40 | Zilog Z84C00*, NEC uPD780C |
| U2 | 74HC32 | 1 | Quad OR | DIP14 | akizuki |
| U3 | ATMEGA4809 | 1 | ATMEGA4809 | PDIP40 | akizuki |
| U4 | AS6C4008 | 1 | SRAM | DIP32 | mouser |
| X1 | 1-10MHz | 1 | Crystal OSC | DIP8 | akizuki 8MHz, akizuki 10MHz |
| C1, C2, C3, C4, C5, C6, C7, C8, C9 | 0.1uF | 9 | |||
| C10 | 470uF | 1 | |||
| R1 | 1K-10K | 1 | for /WAIT control, 10K(-5MHz), 1K(8MHz-) | ||
| R2 | 10K | 1 | for pullup | ||
| R3, R4 | 10K | 2 | for I2C pullup | ||
| R5 | 1K | 1 | for LED | ||
| RN1 | 10Kx4 | 1 | for pullup | akizuki | |
| RN2 | 10Kx4 | 1 | for IPL control | ||
| RN3 | 10Kx8 | 1 | for IPL control | akizuki | |
| D1 | LED | 1 | 3mm | ||
| SW1 | Push Button | 1 | Reset SW | akizuki | |
| J1, J2 | 1x6 Pin Socket | 2 | for SDCard, RTC | ||
| J3 | 1x4 Pin Socket | 1 | for I2C | pitch 2.54 | |
| J4 | 1x4 Pin Socket | 1 | for I2C | pitch 2.0 | |
| J5 | USB Type-C Power | 1 | for PowerSupply | akizuki | |
| J6 | 1x3 Pin Socket | 1 | for UPDI | ||
| J7 | 1x6 Pin Header | 1 | for Serial comm | ||
| J8 | 2x13 Pin Header | 1 | for I/O Bus export | ||
| SDCard I/F | SD Card Module | 1 | amazon.co.jp | ||
| RTC I/F | RTC Module | 1 | amazon.co.jp |
| Address | Size | Name | Note |
|---|---|---|---|
| 0x0000 - 0x7FFF | 32KB | RAM | Banked memory selected with BANKSEL0-3 |
| 0x8000 - 0xFFFF | 32KB | RAM | Fixed to "the tail of Banks" |
I/O Engine| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 2 | 4x10k | Resistor_THT:R_Array_SIP5 | RN1, RN2 |
| 2 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C10 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm_Socket | U2 |
| 1 | 8MHz | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | 8x10k | Resistor_THT:R_Array_SIP9 | RN3 |
| 1 | AS6C4008-55PCN | Package_DIP:DIP-32_W15.24mm_Socket | U4 |
| 1 | ATMEGA4809-PF | Package_DIP:DIP-40_W15.24mm_Socket | U3 |
| 1 | Conn_01x03_Socket | sbcz80cpm:UPDIconn | J6 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J4 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J8 |
| 1 | Conn_Coaxial_Power | sbcz80cpm:A295-CTRPB-1 | J5 |
| 1 | LED_Small | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP2 |
| 1 | Z80CPU | Package_DIP:DIP-40_W15.24mm_Socket | U1 |

gcoonrod/circuit-tap
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at


mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos


misterblack1/tandy1000ex-hx-ram
Tandy 1000EX/HX RAM Expansion Board



SmallRobot2000/AMIX-68k
Motorola 68010 based sbc with IDE, keyboard, DMA, PIT, Xosera & more!
It measures 95 × 100 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ATMEGA4809-PF, 74LS32SC and AS6C4008-55PCN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tkhshmsy/sbcz80cpm repository on GitHub, at the commit this page was made from: the board is pcb/sbcz80cpm/sbcz80cpm.kicad_pcb and its schematic pcb/sbcz80cpm/sbcz80cpm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).