2 layers100 × 40 mm
2 layers86.5 × 46 mm
Malory
tk20dk/maloryLow power Si4432 sensor module
- Size
- 86.5 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 25
- Pads
- 100
- Tracks, vias
- 241, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2020
- Updated
- 19 Nov 2020
Overview
Malory is an open-source printed circuit board by tk20dk, from the tk20dk/malory repository on GitHub, published under the MIT licence. It is a 2-layer board of 86.5 × 46 mm with 27 parts on 25 nets, routed with 241 tracks and 23 vias.
It is built around the STM8L051F3P6 and CR2450. Its parts include 7 capacitors, 6 resistors, 3 ICs, 2 connectors and 1 diode. It belongs with the STM8 boards of this library.
Main components
2README
README.mdmalory
Low power Si4432 sensor module
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C7 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | MH1, MH2, MH3, MH4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 470u | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C1 |
| 1 | Antenna | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | BH1750 | malory:BH1750 | U3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CR2450 | malory:CR2450H | BT1 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | LED_Dual_ACA | LED_THT:LED_D3.0mm-3 | D1 |
| 1 | Reset | malory:SW_Tactile_SKHH_Angled | SW1 |
| 1 | SI7021 | malory:SI7021 | U2 |
| 1 | STM8L051F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | XL4432-SMD | malory:RF4462PRO | M1 |
Questions
How big is the Malory PCB?
It measures 86.5 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Malory use?
27 parts, built around the STM8L051F3P6 and CR2450. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Malory KiCad files?
From the tk20dk/malory repository on GitHub, at the commit this page was made from: the board is kicad/malory.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Malory design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers59.8 × 147.1 mm
- 2 layers170 × 75 mm
- 2 layers17.8 × 29.2 mm
- 2 layers42 × 62.4 mm
STM8S
naufalra/AutomatedTissueProcessor_Final_Thesis_PT.Miconos
Developing and inverse engineering heater for tissue processor with a target to use local components (TKDN) for over 70%. The research is also used for my bachelor thesis.
59 parts1 - 2 layers28.9 × 64.4 mm
Sensor rev1
npeixoto64/ExitGuardian
A full product project that watches windows with wireless sensors and has a gateway for the main door with wireless sensors. When you open the exit door to leave, it checks:
55 parts1 - 2 layers38.6 × 72.1 mm
- 2 layers69 × 100 mm
