

SCHMITT TRIGGER
SRAM from scratch!
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 12
- Pads
- 30
- Tracks, vias
- 43, 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Oct 2026
- Updated
- 31 Oct 2026
Overview
SCHMITT TRIGGER is an open-source printed circuit board by tiydwe, from the tiydwe/SRAM repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board with 12 parts on 12 nets, routed with 43 tracks and 4 vias.
Its parts include 6 resistors and 6 transistors.
README
README.mdSRAM from scratch
256 bytes of SRAM from discrete sot-23 mosfets built without any ICs!
I'm still working on this project!
More coming to this README eventually.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 47R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 3 | Q_NMOS_GSD | easyeda2kicad:SOT-23-N | Q3, Q4, Q6 |
| 3 | Q_PMOS_GSD | easyeda2kicad:SOT-23-P | Q1, Q2, Q5 |
| 2 | 10R | Resistor_SMD:R_0805_2012Metric | R5, R6 |
More from tiydwe/SRAM
12- 4 layers155 × 170 mm

- 4 layers155 × 170 mm

- 4 layers150 × 150.6 mm

- 2 layers104 × 105.1 mm

- 2 layers114.3 × 96.6 mm

- 4 layers150 × 150 mm

- 4 layers

- 4 layers

- 2 layers

- 2 layers

- 2 layers108.3 × 12.1 mm

- 4 layers

Similar boards
- 2 layers

Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm

- 2 layers40 × 15 mm

Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm

- 2 layers26 × 16.9 mm

- 2 layers49 × 25 mm

5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm

Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
What parts does the SCHMITT TRIGGER use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SCHMITT TRIGGER KiCad files?
From the tiydwe/SRAM repository on GitHub, at the commit this page was made from: the board is kicad/controllerBoard/RISING_EDGE_DETECTOR/SCHMITT_TRIGGER/SCHMITT_TRIGGER.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SCHMITT TRIGGER design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).