

1CELL
SRAM from scratch!
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 10
- Tracks, vias
- 9, 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Oct 2026
- Updated
- 31 Oct 2026
Overview
1CELL is an open-source printed circuit board by tiydwe, from the tiydwe/SRAM repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board with 3 parts on 3 nets, routed with 9 tracks and 2 vias.
Its parts include 2 switches and 1 connector.
README
README.mdSRAM from scratch
256 bytes of SRAM from discrete sot-23 mosfets built without any ICs!
I'm still working on this project!
More coming to this README eventually.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_SMD:SW_4.5mm | SW11, SW12 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J6 |
More from tiydwe/SRAM
12- 4 layers155 × 170 mm

- 4 layers155 × 170 mm

- 4 layers150 × 150.6 mm

- 2 layers104 × 105.1 mm

- 2 layers114.3 × 96.6 mm

- 4 layers150 × 150 mm

- 4 layers

- 4 layers

- 2 layers

- 2 layers

- 2 layers108.3 × 12.1 mm

- 4 layers

Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
What parts does the 1CELL use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1CELL KiCad files?
From the tiydwe/SRAM repository on GitHub, at the commit this page was made from: the board is kicad/inputBoard/1CELL/1CELL.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1CELL design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).