

1BIT CELL
SRAM from scratch!
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 12
- Pads
- 37
- Tracks, vias
- 128, 9
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Oct 2026
- Updated
- 31 Oct 2026
Overview
1BIT CELL is an open-source printed circuit board by tiydwe, from the tiydwe/SRAM repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board with 14 parts on 12 nets, routed with 128 tracks and 9 vias.
Its parts include 9 transistors, 2 resistors, 1 capacitor, 1 diode and 1 connector.
README
README.mdSRAM from scratch
256 bytes of SRAM from discrete sot-23 mosfets built without any ICs!
I'm still working on this project!
More coming to this README eventually.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Q_NMOS_GSD | easyeda2kicad:SOT-23-N | Q1, Q2, Q4, Q6, Q7, Q8, Q9 |
| 2 | Q_PMOS_GSD | easyeda2kicad:SOT-23-P | Q3, Q5 |
| 1 | 100nC | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 360R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 47R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J1 |
| 1 | LED | Capacitor_SMD:C_0805_2012Metric | D1 |
More from tiydwe/SRAM
12- 4 layers155 × 170 mm

- 4 layers155 × 170 mm

- 4 layers150 × 150.6 mm

- 2 layers104 × 105.1 mm

- 2 layers114.3 × 96.6 mm

- 4 layers150 × 150 mm

- 4 layers

- 4 layers

- 2 layers

- 2 layers

- 2 layers108.3 × 12.1 mm

- 4 layers

Similar boards
- 4 layers15.2 × 9 mm

Sensors
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
14 parts3.8kApache-2.0 - 4 layers25.5 × 46.5 mm

TremorWatch
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 4 layers81 × 46 mm

XTMAX PCB
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
14 parts534 - 4 layers22 × 42 mm

- 4 layers64 × 46.5 mm

DSC Scan Selector
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
14 parts371 - 4 layers65.2 × 61.4 mm

Pi 400 gpio breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
14 parts253GPL-3.0 - 4 layers20 × 23 mm

- 4 layers

Trill ring
BelaPlatform/Trill
Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.
14 parts77
Questions
What parts does the 1BIT CELL use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1BIT CELL KiCad files?
From the tiydwe/SRAM repository on GitHub, at the commit this page was made from: the board is kicad/sramBoard/8BIT_ROW/1BIT_CELL/1BIT_CELL.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1BIT CELL design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).