4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers21.2 × 23.4 mm
Adafruit LED Sequin WithRails
timmit99/Neopixel_Sequin14Neopixel board in the same form factor as an Adafruit Sequin LED
- Size
- 21.2 × 23.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 16
- Pads
- 40
- Tracks, vias
- 0, 16
- Pours
- 24
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Dec 2022
- Updated
- 16 Dec 2022
Overview
Adafruit LED Sequin WithRails is an open-source printed circuit board by timmit99, from the timmit99/Neopixel_Sequin repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 21.2 × 23.4 mm with 28 parts on 16 nets.
It is built around the WS2812B.
Main components
1README
README.mdNeopixel Sequin Board
10mm x 4mm Neopixel board
Overview
This is a neopixel board in the same form factor as an Adafruit Sequin LED.
Setup
To use, fold the legs of the SK6812MINI as shown below.
You want to end up with your LED looking like the one on the right.
Line up the notched corner of the LED with the marking on the PCB, Solder all 4 legs and add thin wires to the front side for control.
BOM
| Reference | Description | Note | Quantity | LCSC |
|---|---|---|---|---|
| D1 | SK6812 | SK6812MINI | 1 | C524051 |
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | WS2812B | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D1, D1, D1 |
The 4 most common of 28 parts.
Questions
How big is the Adafruit LED Sequin WithRails PCB?
It measures 21.2 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adafruit LED Sequin WithRails use?
28 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adafruit LED Sequin WithRails KiCad files?
From the timmit99/Neopixel_Sequin repository on GitHub, at the commit this page was made from: the board is PCB With Rails/Adafruit LED Sequin-WithRails.kicad_pcb and its schematic Bare PCB/Adafruit LED Sequin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adafruit LED Sequin WithRails design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
