
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

My robot v1 is an open-source printed circuit board by thuytran05, from the thuytran05/Kicad repository on GitHub. It is a 2-layer board of 82.2 × 70 mm with 25 parts on 65 nets, routed with 201 tracks and 44 vias.
Its parts include 3 capacitors, 3 switches and 3 inductors. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x06_Socket | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | L298N_INPUT1, LEFT_MOTOR1, RIGHT_MOTOR1 |
| 2 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | ML1, MR1 |
| 2 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | ESP32_PIN1, ESP32_PIN2 |
| 2 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | STM32_PIN1, STM32_PIN2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 220, 220 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2, SW3 |
| 1 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1041 |
| 1 | C | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C470 |
| 1 | C | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C47 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Debug |
| 1 | Conn_01x04 | Library:test1 | Buck1 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | IMU1 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | 12V_POWER1 |
| 1 | SW_SPST | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
The 21 most common of 25 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 82.2 × 70 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thuytran05/Kicad repository on GitHub, at the commit this page was made from: the board is my_robot_v1/my_robot_v1.kicad_pcb and its schematic linorobot2_mecanum/linorobot2_mecanum.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thuytran05 before reusing the design.