2 layers290.1 × 130 mm
2 layers72 × 31.8 mm
PCB Converter
thuongnncicor/PCB_programming- Size
- 72 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 20
- Pads
- 122
- Tracks, vias
- 279, 29
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Nov 2025
- Updated
- 22 Nov 2025
Overview
PCB Converter is an open-source printed circuit board by thuongnncicor, from the thuongnncicor/PCB_programming repository on GitHub. It is a 2-layer board of 72 × 31.8 mm with 17 parts on 20 nets, routed with 279 tracks and 29 vias.
It is built around the AMS1117-3.3. Its parts include 7 connectors, 4 capacitors, 2 diodes, 1 resistor and 1 IC. It belongs with the STM32 boards of this library.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1N5819 | Diode_SMD:D_SMA | D1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | IC1 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J2 |
| 1 | Conn_02x10_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J1 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x10_P1.27mm_Vertical_SMD | J5 |
| 1 | JLINK_PLUS | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | Program_STM32 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J6 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile | SW1 |
The 16 most common of 17 parts.
Questions
How big is the PCB Converter PCB?
It measures 72 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Converter use?
17 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Converter KiCad files?
From the thuongnncicor/PCB_programming repository on GitHub, at the commit this page was made from: the board is PCB_Converter.kicad_pcb and its schematic PCB_Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Converter design in my own project?
Its repository states no licence, so its author keeps all rights: ask thuongnncicor before reusing the design.
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407