
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Raspberry Pi Hat to make a MiniDexed synthesiser
Minidexed hat is an open-source printed circuit board by threedaymonk, from the threedaymonk/minidexed-hat repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 56 × 65 mm with 14 parts on 42 nets, routed with 106 tracks and 8 vias.
Its parts include 7 connectors, 1 IC and 1 diode.

This aims to make the construction of a MiniDexed a little easier.
Features:
Revision 1 does not include debouncing capacitors for the encoder. I intend to make my own encoder boards with better debouncing.
The PCB dimensions are based on Seth Hillbrand's template for a Raspberry Pi hat.
With an appropriate display, this board should also work with mt32-pi, but I have not tested it.
Set the voltage on the converter before soldering the audio interface in place or installing the hat on the Pi. I recommend around 5.2V.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | ~ | RPi_Hat:RPi_Hat_Mounting_Hole | H1, H2, H3, H4 |
| 1 | 1N4002 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 9-12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Encoder | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | LCD | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | Line out | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | MIDI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | PCM5102_Module | Personal:PCM5102_HW-823 | U1 |
| 1 | RPi_GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | XL4005_DC-DC | Personal:XL4005_DC-DC | PS1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 56 × 65 mm and has 2 copper layers, 0.57 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the threedaymonk/minidexed-hat repository on GitHub, at the commit this page was made from: the board is minidexed-hat.kicad_pcb and its schematic midi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).