
AvalancheVCO
kassu/kassutronics
Projects, documentation... all things synthesizers and electronics

Axoloti control board with 8 knobs, screen, and encoder
Axocontrol is an open-source printed circuit board by threedaymonk, from the threedaymonk/axocontrol repository on GitHub. It is a 2-layer board of 160 × 80 mm with 38 parts on 40 nets, routed with 155 tracks and 0 vias.
It is built around the B10K. Its parts include 10 capacitors, 5 resistors, 4 switches, 3 diodes and 2 connectors.
A control board for the Axoloti Core board.

Inspired by Tom Whitwell's Axo Control, but adds a rotary encoder and an I2C OLED screen and removes the joystick.
| Qty | Ref | Part | Notes |
|---|---|---|---|
| 8 | RV1-8 | 9mm potentiometer B10k | Thonk |
| 3 | SW1-3 | C&K tactile switch | Thonk |
| 1 | SW4 | Encoder with switch | Bourns PEC11R-4220F-S0024 matches the above potentiometers in height |
| 10 | C1-9 | Capacitor 0603 100n | Might not be needed, can also try 10n for C9 and C10 |
| 3 | R1-3 | Resistor 0603 1k | |
| 2 | R5, R6 | Resistor 0603 10k | |
| 3 | D1-3 | 3mm LED | |
| 1 | 0.96" White I2C SSD1306 OLED | Pin order VCC GND SCL SDA, e.g. Banggood | |
| 1 | 1×40 2.54mm header | ||
| 1 | 1×40 2.54mm socket | ||
| 1 | 1900H knob without line | Thonk | |
| 8 | 1900H knob with line | Thonk | |
| 8 | 1.4mm dia × 4mm screw for plastic | For mounting screen: Bitsbox | |
| 6 | M3 × 8mm screw | ||
| 6 | M3 × 11mm threaded standoff |
OpenSCAD files for hardware are provided:
OLED ENC RV1 RV2 RV3 RV4
SDA PB9 SW PB6 PC3 PC4 PA0 PB1
SCL PB8 A PB7
B PC0
SW1 SW2 SW3 RV5 RV6 RV7 RV8
PC1 PC2 PC5 PA4 PA6 PA7 PB0
LED1 LED2 LED3
PA1 PA2 PA3
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 8 | B10K | Personal:Alpha_9mm_Pot | locked, locked, RV2, RV3, RV4, RV5, RV6, RV8 |
| 6 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H5, H6, locked |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 3 | SW_SPST | Personal:CK_D6R90_Push_Switch_SPST | SW1, SW2, SW3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 1 | Axoloti | Connector_PinSocket_2.54mm:PinSocket_1x40_P2.54mm_Vertical | J1 |
| 1 | OLED | Personal:OLED_128x64 | J2 |
| 1 | RotaryEncoder_Switch | Personal:Bourns_PEC11R_Encoder_Switch | SW4 |

kassu/kassutronics
Projects, documentation... all things synthesizers and electronics




kraakenstuff/ADSR
2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)

niektb/sluisbrinkie-eurorack-published
Published Modules of the Sluisbrinkie project


benjiaomodular/MiniVerb
A through-hole reverb module for Eurorack based around the Daisy Seed by Electrosmith
It measures 160 × 80 mm and has 2 copper layers, 0.57 mm thick.
38 parts, built around the B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the threedaymonk/axocontrol repository on GitHub, at the commit this page was made from: the board is axocontrol.kicad_pcb and its schematic axocontrol.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask threedaymonk before reusing the design.