2 layers150 × 90 mm
ECE445L Lab7Restart
Andres-Wearden/Lab10
The typical explanation for the repo structure. Lab specific instructions can be found further below.
87 parts
2 layers94.5 × 108 mm
Penrose project files
- Size
- 94.5 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 98
- Nets
- 44
- Pads
- 451
- Tracks, vias
- 2,235, 415
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Apr 2020
- Updated
- 11 Apr 2020
Overview
Penrose is an open-source printed circuit board by threebytesfull, from the threebytesfull/penrose_hardware repository on GitHub. It is a 2-layer board of 94.5 × 108 mm with 98 parts on 44 nets, routed with 2,235 tracks and 415 vias.
It is built around the AS1130-BSST, FT230XS-R and BAT60JFILM, with the DX4R005HJ5R2000 and MPZ2012S601AT000 among its other parts. Its parts include 41 diodes, 18 resistors, 14 capacitors, 4 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Main components
5
AS1130-BSST
SSOP-28-208mil-40℃~+85℃ 2.7V~5.5V I²C SSOP-28-208mil Digital Tube Drivers ROHSAdvanced Monolithic SystemsDigital Tube Drivers
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
BAT60JFILM
SOD-32310V 3A 580mV@1A 6uA@10V Independent SOD-323 Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
DX4R005HJ5R2000
SMDUSB ConnectorsJAE Electronics
MPZ2012S601AT000
0805-55℃~+125℃ 1 100mΩ 2A 600Ω@100MHz ±25% 0805 Ferrite Beads ROHSTDKFerrite Beads
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | ARGB1313HS-TR_CommonAnode | penrose:LED_0808_Metric2020_CommonAnode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C12, C13, C14 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 3 | 560 | Resistor_SMD:R_0603_1608Metric | R16, R17, R18 |
| 3 | SW_Push | penrose:SW_SPST_B3U-1000P_HandSolder | SW1, SW2, SW3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R9, R12 |
| 2 | 220k | Resistor_SMD:R_0603_1608Metric | R11, R14 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R10, R13 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C9, C11 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 240 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 470p | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | ARM JTAG/SWD | penrose:FTSH-105-01-F-DV-K_HandSolder | J2 |
| 1 | AS1130-BSST | penrose:SSOP-28_5.3x10.2mm_P0.65mm_Clear | U2 |
| 1 | BAT60JFILM | Diode_SMD:D_SOD-323_HandSoldering | D37 |
| 1 | CS0 | penrose:TestPoint_Pad_D1.0mm | TP0 |
| 1 | CS1 | penrose:TestPoint_Pad_D1.0mm | TP1 |
| 1 | CS10 | penrose:TestPoint_Pad_D1.0mm | TP10 |
| 1 | CS11 | penrose:TestPoint_Pad_D1.0mm | TP11 |
| 1 | CS2 | penrose:TestPoint_Pad_D1.0mm | TP2 |
| 1 | CS3 | penrose:TestPoint_Pad_D1.0mm | TP3 |
| 1 | CS4 | penrose:TestPoint_Pad_D1.0mm | TP4 |
| 1 | CS5 | penrose:TestPoint_Pad_D1.0mm | TP5 |
| 1 | CS6 | penrose:TestPoint_Pad_D1.0mm | TP6 |
| 1 | CS7 | penrose:TestPoint_Pad_D1.0mm | TP7 |
| 1 | CS8 | penrose:TestPoint_Pad_D1.0mm | TP8 |
| 1 | CS9 | penrose:TestPoint_Pad_D1.0mm | TP9 |
| 1 | DX4R005HJ5R2000 | penrose:DX4R005HJ5_HandSolder | J1 |
| 1 | FT230XS | penrose:SSOP-16_3.9x4.9mm_P0.635mm_Clear | U3 |
| 1 | MCP1825S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | MPZ2012S601AT000 | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | SCL | penrose:TestPoint_Pad_D1.0mm | TP12 |
| 1 | SDA | penrose:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SML-D12D1W (orange) | LED_SMD:LED_0603_1608Metric | D38 |
| 1 | SML-D12M1W (yellowish green) | LED_SMD:LED_0603_1608Metric | D41 |
| 1 | SML-D12V1W (red) | LED_SMD:LED_0603_1608Metric | D40 |
| 1 | SML-D12Y1W (yellow) | LED_SMD:LED_0603_1608Metric | D39 |
| 1 | STM32F303K8Tx | penrose:LQFP-32_7x7mm_P0.8mm_Clear | U1 |
| 1 | SWD | penrose:Harwin_M20-88900445_1x04_P2.54mm_Horizontal | J3 |
Questions
How big is the Penrose PCB?
It measures 94.5 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Penrose use?
98 parts, built around the AS1130-BSST, FT230XS-R, BAT60JFILM and DX4R005HJ5R2000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Penrose KiCad files?
From the threebytesfull/penrose_hardware repository on GitHub, at the commit this page was made from: the board is penrose.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Penrose design in my own project?
Its repository states no licence, so its author keeps all rights: ask threebytesfull before reusing the design.
Similar boards
- 2 layers80 × 96 mm
Programmer Board
Reid-n0rc/LMS-6_Interface_Board
Interface to the LMS-6 radiosonde carde edge connector.
55 parts4GPL-3.0 - 2 layers90 × 85 mm
MultiBench
M-Mrk/MultiBench
A bench multimeter with the usual functions, but also with usb connectivity to log, stream and monitor readings.
87 parts1 - 2 layers62 × 129 mm
Esp32-main
nicolaeandreivasile/bike-embedded-app
Embedded application for bikes that collect and display various riding data.
93 parts1 - 2 layers120 × 100 mm
Enose PCB
Tobias66662/Bachelor-Project-PCB-Designs
PCB to be used in the Enose (for Bachelor Project)
157 parts1 - 4 layers108.4 × 50 mm
No fly zone
tynix5/no_fly_zone
STM32-based quadcopter and remote controller running on custom hardware and software
90 parts1 - 4 layers61 × 68.8 mm
WDM(RevB V1)
ColbyDAllen/Wearable-Drum-Machine
This project is mostly complete. Until I can find a more suitable input/sensory solution, please consider this work on hiatus.
114 parts - 4 layers53.5 × 53.5 mm
MiniTULPAR
ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:
92 partsBSD-3-Clause