

Modbus I/O modules on ATmega
- Size
- 85 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 41
- Pads
- 201
- Tracks, vias
- 526, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Jul 2018
- Updated
- 17 Jan 2023
Overview
8DI is an open-source printed circuit board by thoczek, from the thoczek/Modbus-IO repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 85 × 100 mm with 67 parts on 41 nets, routed with 526 tracks and 0 vias.
Its parts include 33 diodes, 20 capacitors, 5 ICs, 4 connectors and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdModbus-IO modules
Complete Modbus I/O modules on ATmega8
Contains:
- 4DI-4DO - 4 digital inputs 24VDC and 4 relay NO/NC outputs
- 8DI - 8 digital inputs 24VDC
- 7RO - 7 Relay outputs NO/NC
- WIFI - Module for WIFI conectibity for modules
- EAP-MODBUSconfig - Software for configuration of the modules.
Modules have possibility to act in TCP mode throught WIFi module.
Technology used:
Schematics and PCB board done in Kicad.
Firmware - C++ eclipse.
Software - C#
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | R-10 | D1, R1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +5 | |
| 14 | 100nF | C-5 | C3, C7, C8, C9, C10, C11, C12, C13, C14, C15, C17, C18, C19, C20 |
| 11 | R-12 | D2, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 | |
| 2 | bornier5 | P2, P8 | |
| 2 | 1pin | , | |
| 2 | bornier3 | P1, P3 | |
| 2 | DIP-16__300_ELL | U2, U3 | |
| 2 | 4,7uF | C-2_5 | C5, C16 |
| 2 | 47uF | C-2_5 | C4, C6 |
| 2 | C | C1-1 | C1, C2 |
| 2 | P*** | 1pin | 1PIN, 1PIN |
| 1 | 7805 | U1 | |
| 1 | Osc_Moj | X1 | |
| 1 | DIP-8__300_ELL | IC2 | |
| 1 | LED-3MM | D3 | |
| 1 | ATMEGA8-P | DIP-28__300_ELL | IC1 |
More from thoczek/Modbus-IO
4Similar boards
- 2 layers138.1 × 114.3 mm

- 2 layers133.1 × 53.8 mm

- 2 layers160 × 100.1 mm

Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers65 × 56 mm

Zpui shld wg12864b
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
67 parts253GPL-3.0 - 2 layers138.1 × 89.7 mm

- 2 layers51 × 30 mm

- 2 layers93.5 × 55 mm

- 2 layers58.4 × 101.6 mm

Questions
How big is the 8DI PCB?
It measures 85 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8DI use?
67 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8DI KiCad files?
From the thoczek/Modbus-IO repository on GitHub, at the commit this page was made from: the board is 8DI/Board/8DI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8DI design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).


