Skip to the content
2 layers33.7 × 36.6 mmHexpansion grove, the printed circuit board in 3D

EMFCamp badge hexpansion for Seeed Studio Grove modules

Size
33.7 × 36.6 mm
Copper layers
2
Thickness
1 mm
Parts
14
Nets
15
Pads
72
Tracks, vias
82, 15
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Jun 2026
Updated
14 Jul 2026

Overview

Hexpansion grove is an open-source printed circuit board by thiseldo, from the thiseldo/hexpansion_grove repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 33.7 × 36.6 mm with 14 parts on 15 nets, routed with 82 tracks and 15 vias.

It is built around the 24C32. Its parts include 4 connectors, 3 resistors, 2 capacitors, 1 IC and 1 diode. It belongs with the lEDs and displays boards of this library.

Main components

1

README

README.md

"Seeed Studio Grove" connector adapter

Enables many of the Grove expansion modules to be used with the badge.

Top render

  • I2C devices such as sensors
  • I/O 1 uses HS_F and HS_G pins
  • I/O 2 uses HS_H and HS_I pins

Use of pins is described at Create a hexpansion

What's included

  • kicad - The Kicad project files for the hexpansion along with gerbers ready to send to a PCB fabricator.
  • software - Example applications for the hexpansions, using DS18B20 temperature probe and a Grove alcohol gas sensor.

Acknowledgements

Uses the hexpansion template from EMF.

Parts

14
QtyValueFootprintReferences
3GROVE-CONNECTOR-DIP_4P-2.0_Seeed Fusion Component Libraries for KiCad:GROVE-HW4-2.0J2, J3, J4
2100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2
124C32Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1Hexpansion-Connectortildagon:hexpansion-edge-connectorJ1
1LEDLED_SMD:LED_0805_2012MetricD1
1RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1

Similar boards

  • 2 layers40 × 100 mmBack pcb, the printed circuit board in 3D

    Back pcb

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    118 parts148GPL-3.0
  • 4 layers65 × 45.4 mmKimchi ulid, the printed circuit board in 3D

    Kimchi ulid

    adamjvr/kimchi-HiFi-lid

    A lid for the Kimchi SBC that provides: Stereo audio ouptut/input, mic in, and headphone output.

    51 parts1
  • 4 layers65 × 32 mmKimchi ulid, the printed circuit board in 3D

    Kimchi ulid

    groupgets/kimchi-micro-lid

    Expansion module for kimχ micro

    10 parts1
  • 2 layers65 × 72.9 mmAstro CAT, the printed circuit board in 3D

    Astro CAT

    aarondennis/mup-astro-cat-hardware

    Kicad schematic and pcb files for the MUP Astro CAT project.

    40 parts
  • 2 layers55 × 95 mmODAS PSOC5, the printed circuit board in 3D

    ODAS PSOC5

    land-boards/lb-boards

    land-boards - Board Designs

    48 parts31
  • 2 layers85 × 90 mmDriver motores EDU CIAA, the printed circuit board in 3D

    Driver motores EDU CIAA

    ciaa/Ponchos

    El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.

    41 parts15
  • 4 layers47.5 × 47.5 mmUsb sniffer h7p20, the printed circuit board in 3D

    Usb sniffer h7p20

    vllogic/dalishen_pi_h7p20

    # English # I. Introduction Hardware design format: KiCad 9.0.6 The CH32H417 serves as a USB 3.0 forwarder, with a unidirectional communication speed of up to 400MB/s, breaking the speed bottleneck of the 68013.

    140 parts3GPL-3.0

Questions

How big is the Hexpansion grove PCB?

It measures 33.7 × 36.6 mm and has 2 copper layers, 1 mm thick.

What parts does the Hexpansion grove use?

14 parts, built around the 24C32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hexpansion grove KiCad files?

From the thiseldo/hexpansion_grove repository on GitHub, at the commit this page was made from: the board is kicad/hexpansion_grove.kicad_pcb and its schematic kicad/hexpansion_grove.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hexpansion grove design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).