

Lr1120 mikrobus
lr1120 mikrobus board
- Size
- 57.2 × 25.4 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 110
- Nets
- 86
- Pads
- 412
- Tracks, vias
- 404, 910
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Feb 2023
- Updated
- 29 Mar 2024
Overview
Lr1120 mikrobus is an open-source printed circuit board by thingsat, from the thingsat/lr1120_mikrobus repository on GitHub. It is a 4-layer board of 57.2 × 25.4 mm with 110 parts on 86 nets, routed with 404 tracks and 910 vias.
It is built around the BGA524N6E6327XTSA1, SKY13588-460LF and LIS2DE12, with the M24128-BFMH6TG, RCLAMP2451ZATFT and NT2016SA-32M-END4263A among its other parts. Its parts include 52 capacitors, 16 resistors, 16 inductors, 5 ICs and 3 diodes. It belongs with the radio and wireless boards of this library.
Main components
8BGA524N6E6327XTSA1
TSNP-6-2TSNP-6-2 RF Amplifiers ROHSInfineon TechnologiesRF AmplifiersSKY13588-460LF
QFN-12-EP(2x2)-40℃~+105℃ 100MHz~6GHz 1dB 2.5V~4.8V 40dB Integrated control logic triple-pole/single-throw QFN-12-EP(2x2) RF Switches ROHSSkyworks SolutionsRF SwitchesLIS2DE12
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 500nA 8bit Accelerometer SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSSTMicroelectronicsAccelerometersM24128-BFMH6TG
UFDFPN-5(1.4x1.7)-40℃~+85℃ 1.7V~5.5V 128Kbit 1MHz 200 Years 4,000,000 Cycles 5ms I2C UFDFPN-5(1.4x1.7) EEPROM ROHSSTMicroelectronicsEEPROMRCLAMP2451ZATFT
02010.35pF 1 24V 31V 32W@8/20us 4A@8/20us 50nA 8V Bidirectional IEC 61000-4-2 TVS 0201 ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)NT2016SA-32M-END4263A
SMD2016-4PSMD2016-4P New Arrivals ROHSNDKUncategorisedNX2016SA-32M-EXS00A-CS06465
SMD2016-4P10pF 32MHz 60Ω Crystal Oscillator ±10ppm SMD2016-4P Crystals ROHSNDKCrystalsNX3215SA
SMD3215-2PSMD3215-2P New Arrivals ROHSNDKUncategorised
README
README.mdSemtech LR1120 Mikrobus Board
''The LR1120 is an ultra-low power device targeting global geolocation applications. It provides multi band LoRa® and Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) communication over sub-GHz and 2.4GHz Industrial, Scientific and Medical (ISM) bands as well as licensed S-Band for satellites. It integrates a Cloud-native multi-constellation global navigation satellite system (GNSS) scanner and a passive Wi-Fi MAC address scanner, both leveraging Semtech’s LoRa Cloud™ services.''
The objective of this student homework is to adapt the Semtech LR1120 LR1120MB1DIS eval board (868 MHz for the SubGhz interface) to the convenient Mikrobus form factor.
This project is being developed at Polytech Grenoble and CSUG (Université Grenoble-Alpes) by Dante Regiani Freitas and supervised by Prof. Didier Donsez.
Hardware

Firmware
Misc
Media

Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1nF | Capacitor_SMD:C_0201_0603Metric | C39, C43, C45, C46, C54, C58 |
| 5 | 100nF | Capacitor_SMD:C_0201_0603Metric | C1, C4, C33, C47, C49 |
| 4 | NC | Capacitor_SMD:C_0402_1005Metric | C11, C16, C20, C53 |
| 3 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C17, C19, C23 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C34, C35, C37 |
| 3 | 330 | Resistor_SMD:R_0201_0603Metric | R14, R15, R30 |
| 3 | 47nH | Inductor_SMD:L_0402_1005Metric | L3, L4, L10 |
| 3 | 47pF | Capacitor_SMD:C_0201_0603Metric | C2, C6, C7 |
| 3 | 47pF | Capacitor_SMD:C_0402_1005Metric | C10, C15, C21 |
| 3 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | ANT_GNSS1, ANT_LR112x1, ANT_WIFI1 |
| 3 | LED | LED_SMD:LED_0402_1005Metric | RX1, Scanning1, TX1 |
| 3 | RClamp2451ZA | Diode_SMD:D_0201_0603Metric | D1, D2, D3 |
| 2 | 0.5pF | Capacitor_SMD:C_0402_1005Metric | C24, C26 |
| 2 | 1.2pF | Capacitor_SMD:C_0402_1005Metric | C8, C18 |
| 2 | 3.3pF | Capacitor_SMD:C_0402_1005Metric | C31, C32 |
| 2 | 3.6nH | Inductor_SMD:L_0402_1005Metric | L15, L20 |
| 2 | 6.8pF | Capacitor_SMD:C_0402_1005Metric | C9, C14 |
| 2 | 9.5nH | Inductor_SMD:L_0402_1005Metric | L11, L13 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 2 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | VDD_RADIO1, VDD_RF_SW1 |
| 2 | NC | Resistor_SMD:R_0201_0603Metric | R17, R32 |
| 2 | NC | Resistor_SMD:R_0603_1608Metric | R1, R10 |
| 2 | NC (4.7k) | Resistor_SMD:R_0201_0603Metric | R5, R6 |
| 1 | 0.5pF | Capacitor_SMD:C_0201_0603Metric | C56 |
| 1 | 0.7pF | Capacitor_SMD:C_0402_1005Metric | C30 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | LR112x_2 |
| 1 | 0R | Resistor_SMD:R_0201_0603Metric | R18 |
| 1 | 1.3pF | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 1.6pF | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | 1.8pF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 1.8pF | Capacitor_SMD:C_0201_0603Metric | C57 |
| 1 | 100 | Resistor_SMD:R_0201_0603Metric | R9 |
| 1 | 100R | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | 10R (100MHz) | Inductor_SMD:L_0201_0603Metric | FB1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | LR112x_1 |
| 1 | 10pF | Capacitor_SMD:C_0201_0603Metric | C50 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 12pF | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 2.2nF | Capacitor_SMD:C_0201_0603Metric | C5 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L7 |
| 1 | 200R | Resistor_SMD:R_0201_0603Metric | R33 |
| 1 | 220 | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 22nH | Inductor_SMD:L_0402_1005Metric | L9 |
| 1 | 3.3nH | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | 33nH | Inductor_SMD:L_0402_1005Metric | L12 |
| 1 | 33pF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 3pF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C48 |
| 1 | 470nF | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | 470pF | Capacitor_SMD:C_0201_0603Metric | C55 |
| 1 | 6.8nH | Inductor_SMD:L_0402_1005Metric | L8 |
| 1 | 8.2nH | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | 8.2nH | Inductor_SMD:L_0201_0603Metric | L14 |
| 1 | 9.1nH | Inductor_SMD:L_0402_1005Metric | L17 |
| 1 | BGA524N6E6327XTSA1 | BGA524N6:BGS12SN6E6327XTSA1 | U8 |
| 1 | LIS2DE12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U5 |
| 1 | LOGO | LOGO | G*** |
| 1 | LR1120 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalVias | U1 |
| 1 | M24128-BFMH6TG | M24128B:M24128BFMH6TG | U7 |
| 1 | MIKROBUS_MODULE_CONN | Mikrobus:MIKROBUS_MODULE_CONN | CON1 |
| 1 | NC (100nF) | Capacitor_SMD:C_0201_0603Metric | C52 |
| 1 | NC (10k) | Resistor_SMD:R_0201_0603Metric | R31 |
| 1 | NT2016SA-32M-END4263A | TXCO:NT2016SA-32M-END4263A | Q2 |
| 1 | NX2016SA-32M-EXS00A-CS06465 | EXS00A-CS06465:NX2016SA32MEXS00ACS06465 | Q1 |
| 1 | NX3215SA | TXCO:NX3215SA | Q3 |
| 1 | SKY13588-460LF | SKY13588:QFN50P200X200X65-13N-D | U2 |
Similar boards
- 2 layers76.2 × 76.2 mm

- 4 layers45.3 × 31.5 mm

- 4 layers73 × 50 mm

Tardigrade
nortismo/tardigrade
Open Hardware board with an embedded LPC55 MCU and a SX1262 LoRa transceiver
127 parts - 4 layers36 × 46 mm

- 2 layers335 × 340.9 mm

RCA Radio Telescope
Glaubinator/Radio-Telescope-RCA
Radio Telescope System for 1 GHz to 2 GHz Operation
81 parts3GPL-3.0 - 12 layers92 × 92 mm

- 4 layers61.2 × 61.2 mm

Ganglion 01
OpenBCI/Ganglion_Hardware_Design_Files
General repo for Ganglion hardware files
141 parts91 - 2 layers66.2 × 57.3 mm

Questions
How big is the Lr1120 mikrobus PCB?
It measures 57.2 × 25.4 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Lr1120 mikrobus use?
110 parts, built around the BGA524N6E6327XTSA1, SKY13588-460LF, LIS2DE12 and M24128-BFMH6TG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lr1120 mikrobus KiCad files?
From the thingsat/lr1120_mikrobus repository on GitHub, at the commit this page was made from: the board is kicad/LR1120_Mikrobus/LR1120_Mikrobus.kicad_pcb and its schematic kicad/LR1120_Mikrobus/LR1120_Mikrobus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lr1120 mikrobus design in my own project?
Its repository states no licence, so its author keeps all rights: ask thingsat before reusing the design.