4 layers100 × 100 mm
ESP32-Eurorack Audio
ctag-fh-kiel/esp32-eurorack-audio
Open source eurorack audio module based on ESP32
173 parts71
2 layers28 × 18 mm
Esp32-programmer
thingler/esp32-programmer8Thingler ESP32 Programmer
- Size
- 28 × 18 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 21
- Pads
- 106
- Tracks, vias
- 250, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Mar 2020
- Updated
- 1 Apr 2020
Overview
Esp32-programmer is an open-source printed circuit board by thingler, from the thingler/esp32-programmer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 28 × 18 mm with 23 parts on 21 nets, routed with 250 tracks and 18 vias.
It is built around the CP2102N-A01-GQFN24, USBLC6-2SC6 and SS8050-G. Its parts include 7 resistors, 6 capacitors, 3 ICs, 2 transistors and 2 connectors. It belongs with the interfaces and adapters boards and the ESP32 and RISC-V boards of this library.
Main components
3
CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
SS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)
README
readme.mdThingler ESP32 Programmer
Thingler ESP32 Programmer is a USB Type-C to UART ESP32 programmer. The programmer is based on the CP2102N chip with two tactile buttons, BOOT and EN. The programmer can also be used to power the ESP32 (3.3V) chip and read log data sent from the ESP32 chip.
Thingler ESP32 Programmer has been designed for the Thingler ESP32-PICO-D4 Module but can be used to program any ESP32 chip.
Thingler ESP32 Programmer schematics and PCB has been designed with KiCad.
Getting started
Requirements
-
Follow Espressif Systems Getting started instructions
-
Silicon Labs drivers in case the programmer is not recognized by the computer
-
KiCad for the schematics
Build
The PCB wihout components can be ordered from Aisler or the PCB can be ordered from any fabrication houses by providing the gerber files.
The following components has been used for the programmer:
| Ref | Qty | Manufacturer Part Number | Manufacturer | Description | Product Link |
|---|---|---|---|---|---|
| J1 | 1 | USB4110-GF-A | GCT | CONN USB 2.0 TYPE-C R/A SMT | Digi-Key |
| J2 | 1 | 61300611021 | Wurth Elektronik | Headers & Wire Housings WR-PHD 2.54mm Hdr 6P Single RA Gold | Mouser |
| U1 | 1 | USBLC6-2SC6 | STMicroelectronics | ESD Protection Low Cap | Mouser |
| U2 | 1 | TLV75733PDBVR | Texas Instruments | LDO Voltage Regulators 1-A | Mouser |
| U3 | 1 | CP2102N-A02-GQFN24 | Silicon Labs | USB Interface IC USB to UART bridge | Mouser |
| SW1, SW2 | 2 | PTS815 SJK 250 SMTR LFS | C&K | Tactile Switch | Digi-Key |
| Q1, Q2 | 2 | SS8050-G | Comchip Technology | Bipolar NPN Transistors | Mouser |
| D1 | 1 | RB161MM-20TR | ROHM Semiconductor | Schottky Diode | Mouser |
| R1, R4, R5 | 3 | RC0805FR-071KL | Yageo | 1 k ohm 1% 1/8W 0805 | Digi-Key |
| R2, R3 | 2 | CRCW080510K0FKEAC | Vishay / Dale | 10 k ohm 1% 1/8W 0805 | Mouser |
| R6, R7 | 2 | CRG0805F5K1 | TE Connectivity Passive Product | 5.1 k ohm 1% 1/8W 0805 | Digi-Key |
| C1, C3, C5, C6 | 4 | 885012207098 | Wurth Elektronik | 100 nF 10% 0805 50V | Mouser |
| C2, C4 | 2 | CGA4J1X7R0J106K125AC | TDK | 10 uF 10% 0805 6.3V | Mouser |
License
Released under GNU/GPL Version 3
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C6 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R4, R5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | BOOT | esp32-programmer:PTS 815 | SW2 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | EN | esp32-programmer:PTS 815 | SW1 |
| 1 | TLV757P | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | esp32-programmer:USB C | J1 |
Questions
How big is the Esp32-programmer PCB?
It measures 28 × 18 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-programmer use?
23 parts, built around the CP2102N-A01-GQFN24, USBLC6-2SC6 and SS8050-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-programmer KiCad files?
From the thingler/esp32-programmer repository on GitHub, at the commit this page was made from: the board is esp32-programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-programmer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers40.1 × 38.1 mm
- 2 layers159 × 140.1 mm
Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 4 layers61 × 100 mm
BigCore
Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.
152 parts4CERN-OHL-W-2.0 - 2 layers66.9 × 110 mm
Kitchen clock
chof747/kitchen-clock
This project is building a kitchen glock with the following functions:
74 parts - 4 layers40 × 80 mm
BarbelMotionTracker V1
ThorbenH/ba-thesis-project
This git project is dedicated to a prototype implementation that attempts to track and evaluate the motion of a barbell in the gym.
123 parts - 4 layers160 × 78.8 mm
Remote Controller
GhanGhan/SurvBot
Remote controlled robot that surveys the environment it is travelling in
85 parts - 6 layers230 × 56 mm
