Skip to the content
2 layers80 × 73 mmSpinKeys, the printed circuit board in 3D

Repo containing the files for my HackPad made for Blueprint by Hack Club & AMD. --- BOM: - 1x Seeed Studio XIAO RP2040 - 1x 128x64 0.91" I2C OLED Screen - 2x ALPS EC11 Rotary Encoders - 5x Cherry MX-Style Mechanical Key…

Size
80 × 73 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
20
Pads
75
Tracks, vias
74, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Dec 2025
Updated
8 Jul 2026

Overview

SpinKeys is an open-source printed circuit board by TheTinkerersHaven, from the TheTinkerersHaven/SpinKeys-Hackpad repository on GitHub. It is a 2-layer board of 80 × 73 mm with 14 parts on 20 nets, routed with 74 tracks and 0 vias.

Its parts include 5 switches and 1 IC. It belongs with the RP2040 boards of this library.

README

README.md

Repo containing the files for my HackPad made for Blueprint by Hack Club & AMD.

BOM:

  • 1x Seeed Studio XIAO RP2040
  • 1x 128x64 0.91" I2C OLED Screen
  • 2x ALPS EC11 Rotary Encoders
  • 5x Cherry MX-Style Mechanical Key Switches
  • 8x M3 threaded inserts (the holes are 4.7mm diameter and 4mm deep)
  • 8x M3 Screws

Images: SpinKeys-Overall SpinKeys-Case SpinKeys-Lid SpinKeys-Schematic SpinKeys-PCB

NOTE: the case's USB-C hole is taller than usual, to allow the XIAO to be mounted either as SMD or THT.

Parts

14
QtyValueFootprintReferences
5SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5
2RotaryEncoder_Switch_MPRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHolesRC1, RC2
1LOGOLogo:LogoT2H-5percentG***
1OLEDKBD:OLEDOL1
1XIAO-RP2040-DIPOPL:XIAO-RP2040-DIPU1

The 10 most common of 14 parts.

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the SpinKeys PCB?

It measures 80 × 73 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SpinKeys use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SpinKeys KiCad files?

From the TheTinkerersHaven/SpinKeys-Hackpad repository on GitHub, at the commit this page was made from: the board is SpinKeys-Electronics/SpinKeys.kicad_pcb and its schematic SpinKeys-Electronics/SpinKeys.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SpinKeys design in my own project?

Its repository states no licence, so its author keeps all rights: ask TheTinkerersHaven before reusing the design.