

NoisEE project
Find gain functions for a family of pink-ish functions.
- Size
- 109.9 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 85
- Pads
- 356
- Tracks, vias
- 1,015, 142
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jan 2015
- Updated
- 3 Dec 2017
Overview
NoisEE project is an open-source printed circuit board by thenoviceoof, from the thenoviceoof/noisEE repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 109.9 × 56.5 mm with 123 parts on 85 nets, routed with 1,015 tracks and 142 vias.
It is built around the OPA227U, OPA4227P and LMH6642MF, with the PN2222A among its other parts. Its parts include 58 resistors, 23 capacitors, 11 ICs, 5 connectors and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4OPA227U
SOIC-8-18V~18V -2.5V~3.7V -40℃~+85℃ 10nA 138dB 2 2.3V/us 3.5nV/√Hz@10Hz 600nV/℃ 75uV Built-in compensation SOIC-8 Precision Op Amps ROHSTexas InstrumentsOperational AmplifierOPA4227P
DIP14-300Quad, High Precision, Low Noise Operational AmplifierTexas InstrumentsUncategorisedLMH6642MF
SOT-23-5-40℃~+85℃ 1 1.6uA 130MHz 135V/us 17nV/√Hz@100kHz 1mV 2.7V~12.8V 2.7mA 20nA 5uV/℃ 75mA 95dB Rail-to-rail output SOT-23-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierPN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
README
README.mdnoiseEE
Code to find a set of easily derivable software filters to produce different flavors of noise and intermediate stages, and a hardware realization.
If you want a full explanation of the project, see notes part 1 and part 2.
NOTE: the hardware rendition does not work, and will be expensive in time to correct. This project is abandoned.
filter/
Contains scripts to help find and visualize the filter parameters.
-
exploration_parameters.py: exploratory work, lots of commented out code. Generates graphics to investigate whether simple linear parameter interpolation would work. -
ideal_parameters.py: hill climb the gain parameters of a joint filter made of 3 low pass filters to create linear slope approximations, using ideal filter transfer functions. Generatesgains.csv. -
linear_approximation.R: takes ingains.csv(currently a more specific name; you'll need to edit the file) and uses R's segmented library to get a piecewise linear approximation. Generateslinear_parameters.csv. -
generate_hardware_parameter.py: takes inlinear_parameters.csv, and prints out 16-bit fixed-point integer gain parameters for use innoisEE.c.
There are also scripts generating multimedia:
-
generate_audio.py: given the piecemeal results inlinear_parameters.csv, generate a WAV file sweeping from white to red noise. -
visualized_spectrum.py: running this will generate figures used in part 1 of the project notes. -
visualized_animated_spectrum.py: running this will generate animation frames used for the spectrum animation in part 1 of the project notes.
hardware/
Contains the hardware design files.
-
noisEE-project*: KiCad design files. Start with the.proproject file. -
noisEE-components*: contains the OPA227 symbol and MEE1SC footprint for KiCad. -
case__1_5mm.svg/case__3_0mm.svg: the SVG design files fit into Ponoko's P1 template, meant for their respective wood thicknesses. -
case_*.svg: these SVGs are intermediate design files, mostly correcting for laser kerf.
avr/
Contains files for programming the AVR.
-
Makefile: just runmaketo build and upload, if you haveavr-gccandavrdudeon your path, and are using the ISP MKII. You'll need to edit this file if you're using something else. -
noisEE.c: currently in a bad state, checkpointed in the middle of testing how each filter affects the final response. If you want to continue work, you'll need to remove the test loop and uncomment the real runtime loop.
(other)
test_binary_search_loop.py: a quick script to make sure that a binary search on the calculated filter values will terminate.
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 1u | Capacitors_SMD:C_0805 | C4, C5, C6, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +3 |
| 14 | 1M | Resistors_SMD:R_0805 | R11, R17, R18, R19, R20, R33, R34, R35, R36, R53, R54, R55, R56, R57 |
| 13 | 10k | Resistors_SMD:R_0805 | R21, R29, R39, R41, R45, R46, R47, R48, R49, R50, R51, R52, R58 |
| 10 | 0.1u | Capacitors_SMD:C_0805 | C_U2, C_U4, C_U5, C_U6, C_U7, C_U8, C_U9, C_U10, C1, C2 |
| 10 | 3.3k | Resistors_SMD:R_0805 | R3, R4, R5, R6, R22, R23, R24, R30, R31, R32 |
| 8 | plane_pad | NoisEE_Components:plane_pad | A, B, C, D, e, X, Y, Z |
| 4 | 1.6k | Resistors_SMD:R_0805 | R25, R26, R27, R28 |
| 4 | 47k | Resistors_SMD:R_0805 | R1, R2, R12, R13 |
| 4 | AD5292 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U7, U8, U9, U10 |
| 4 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | M3, M3, M3, M3 |
| 3 | 470 | Resistors_SMD:R_0805 | R14, R15, R16 |
| 2 | 4.7uF | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C3, C25 |
| 2 | OPA227 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U4 |
| 2 | OPA4227 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U5, U6 |
| 2 | PN2222A | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1, Q2 |
| 1 | 100k | Resistors_SMD:R_0805 | R9 |
| 1 | 10k | Potentiometers:Potentiometer_Trimmer_Bourns_3339P_Horizontal | TRIM_POT1 |
| 1 | 150k | Resistors_SMD:R_0805 | R8 |
| 1 | 179n | Capacitors_SMD:C_0805 | C10 |
| 1 | 18k | Resistors_SMD:R_0805 | R40 |
| 1 | 1k | Resistors_SMD:R_0805 | R10 |
| 1 | 2.7k | Resistors_SMD:R_0805 | R7 |
| 1 | 33k | Resistors_SMD:R_0805 | R38 |
| 1 | 360k | Resistors_SMD:R_0805 | R37 |
| 1 | 4.7k | Resistors_SMD:R_0805 | R43 |
| 1 | 6.2k | Resistors_SMD:R_0805 | R44 |
| 1 | 8.2k | Resistors_SMD:R_0805 | R42 |
| 1 | 9.1p | Capacitors_SMD:C_0805 | C11 |
| 1 | ATTINY84-S | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | IC1 |
| 1 | COLOR_CONN | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
| 1 | ISP_02x03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P2 |
| 1 | LMH6642 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | MEE1S0509SC | NoisEE_Components:MEE1SC | U3 |
| 1 | SW_DIP_x01 | Buttons_Switches_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | Stereo_CONN | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | USB_OTG | Connectors:USB_Micro-B_10103594-0001LF | J4 |
| 1 | VOL_CONN | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
Similar boards
- 2 layers100 × 100 mm

- 2 layers65 × 62 mm

4x power opamp
antonloof/4x_power_opamp
Four power amplifiers used for driving large ish loads from pwm ouputs
29 parts - 2 layers

- 6 layers130 × 85 mm

CS Shim
shomi74/TUCAN_64CH_SHIM_CURRENT_SUPPLY
64-channel modular ultra-stable bipolar current supply system developed for TUCAN neutron EDM shim-coil magnetic-field control using precision mixed-signal feedback architecture and low-noise PCB design.
156 parts - 2 layers144.8 × 88.9 mm

- 4 layers81 × 60 mm

AOS16 GPU
AJain9199/AOS16
Table of Contents About The Project Pictures Technical Details Directory Structure To-Do Acknowledgments
118 parts1 - 2 layers152.4 × 101.6 mm

8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers33.7 × 66 mm

Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0
Questions
How big is the NoisEE project PCB?
It measures 109.9 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NoisEE project use?
123 parts, built around the OPA227U, OPA4227P, LMH6642MF and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NoisEE project KiCad files?
From the thenoviceoof/noisEE repository on GitHub, at the commit this page was made from: the board is hardware/noisEE-project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NoisEE project design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).