2 layers145 × 27 mm
Led array driver-11-feb-2020
themainframe/led-matrix-driver-pcb
PCB CAM files for my LED Matrix Driver Project based on ESP32
72 parts2
2 layers145 × 27 mm
Led array driver
themainframe/led-matrix-driver-pcb2PCB CAM files for my LED Matrix Driver Project based on ESP32
- Size
- 145 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 113
- Pads
- 360
- Tracks, vias
- 829, 240
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Feb 2020
- Updated
- 19 Mar 2020
Overview
Led array driver is an open-source printed circuit board by themainframe, from the themainframe/led-matrix-driver-pcb repository on GitHub. It is a 2-layer board of 145 × 27 mm with 93 parts on 113 nets, routed with 829 tracks and 240 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-WROOM-32 and MIC5219-3.3YM5-TR, with the MBRA340 and S8050 among its other parts. Its parts include 32 capacitors, 14 resistors, 8 connectors, 6 ICs and 6 diodes. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
5
CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MIC5219-3.3YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 170uA 3.3V 500mA 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MBRA340
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100A 300uA@40V 3A 40V 450mV@3A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdled-matrix-driver-pcb
This is the CAM repository for my LED Matrix Driver Project based on ESP32.
The files are in KiCAD EDA format.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.47uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C13, C14, C15, C19, C20, C21, C25, C26, C27 |
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C16, C17, C18, C22, C23, C24 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R4, R5, R7, R13 |
| 3 | 0.1uF | Capacitor_SMD:CP_Elec_5x5.4 | C28, C29, C30 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5 |
| 3 | 20k | Resistor_SMD:R_0603_1608Metric | R8, R9, R10 |
| 3 | D_TVS | Diode_SMD:D_0603_1608Metric | D1, D2, D3 |
| 3 | IS32FL3738 | Package_SO:SOP65P640X110-28N | U4, U5, U6 |
| 2 | 0.1uF/25V | Capacitor_SMD:C_0603_1608Metric | C3, C6 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C31, C32 |
| 2 | 2A | Fuse:Bourns_MF-MSMF260-2_Polyfuse_2.6A | F1, F2 |
| 2 | MBRA340 | Diode_SMD:D_SMA | D5, D6 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP7A | SW1, SW2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm | Y1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 4.7uF/25V | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 7.5M | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | A5V | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | A_CS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J2 |
| 1 | A_SW | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | B5V | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | B_CS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J4 |
| 1 | B_SW | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J5 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J8 |
| 1 | C5V | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | CL | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | C_CS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J6 |
| 1 | C_SW | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J7 |
| 1 | DA | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | DTR | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | ESP32-WROOM | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | IO0 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | LOGO | LogosAndSilkscreens:damo-8mm | G*** |
| 1 | MIC5219-3.3YM5-TR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | RTS | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | SD | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SYNC | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
The 89 most common of 93 parts.
Questions
How big is the Led array driver PCB?
It measures 145 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led array driver use?
93 parts, built around the CP2102N-A01-GQFN24, ESP32-WROOM-32, MIC5219-3.3YM5-TR and MBRA340. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led array driver KiCad files?
From the themainframe/led-matrix-driver-pcb repository on GitHub, at the commit this page was made from: the board is led-array-driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led array driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask themainframe before reusing the design.
More from themainframe/led-matrix-driver-pcb
1Similar boards
- 2 layers95 × 95 mm
Base controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
41 partsEPL-2.0 - 4 layers160 × 100 mm
OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers65 × 56 mm
- 4 layers65.1 × 70 mm
ESP32-Zip Panelized
vintlabs/ESP32-Zip
ESP32 Development Module compatible with Pi Zero cases (hardware)
88 parts10GPL-3.0 - 4 layers40.1 × 38.1 mm
- 2 layers73 × 100 mm
12V SmartSwitch 2panel
vintlabs/ESP32-PWM-Driver-Devkit
ESP WROOM-32 DevKit with 8 2A PWM Drivers (5-15V)
160 parts5 - 2 layers25.2 × 59.4 mm
