

Show and tell
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 38
- Pads
- 82
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 May 2024
- Updated
- 27 May 2024
Overview
Show and tell is an open-source printed circuit board by thedevleon, from the thedevleon/atopile_esp repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 40 mm with 5 parts on 38 nets.
Its parts include 3 ICs and 2 capacitors.
README
README.mdshow-and-tell
Giving atopile a try...
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10V 10uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | lib:C0603 | C1, C2 |
| 1 | lib:WIFIM-SMD_61P-L16.6-W13.2-P0.80-ESP32-C6-MINI-1-N4 | U2 | |
| 1 | lib:SOT-25_L3.0-W1.6-P0.95-LS2.8-TL | U1 | |
| 1 | lib:LGA-12_L2.0-W2.0-P0.50-BL | U3 |
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Show and tell PCB?
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Show and tell use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Show and tell KiCad files?
From the thedevleon/atopile_esp repository on GitHub, at the commit this page was made from: the board is elec/layout/default/show-and-tell.kicad_pcb and its schematic elec/layout/default/show-and-tell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Show and tell design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).