

I2s codec
Open Source I2S Codec PCB
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 29
- Pads
- 37
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Nov 2025
- Updated
- 23 Nov 2025
Overview
I2s codec is an open-source printed circuit board by thechosenone98, from the thechosenone98/i2s-codec-pcb repository on GitHub. It is a 2-layer board with 5 parts on 29 nets.
Its parts include 4 connectors and 1 IC. It belongs with the audio and music boards of this library.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | J1, J2, J3, J4 |
| 1 | TAC5212IRGER | TheCompany:QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_corner_pads | IC1 |
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
What parts does the I2s codec use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the I2s codec KiCad files?
From the thechosenone98/i2s-codec-pcb repository on GitHub, at the commit this page was made from: the board is hw/i2s-codec.kicad_pcb and its schematic hw/i2s-codec.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the I2s codec design in my own project?
Its repository states no licence, so its author keeps all rights: ask thechosenone98 before reusing the design.