theBrutzler/TinyCorePrinter2this is the one and only TCP
STP220 Polulu is an open-source printed circuit board by theBrutzler, from the theBrutzler/TinyCorePrinter repository on GitHub. It is a 2-layer board of 15.2 × 20.3 mm with 20 parts on 24 nets, routed with 135 tracks and 42 vias.
It is built around the STSPIN220, BC817 and BC817W. Its parts include 10 resistors, 3 connectors, 2 capacitors, 2 transistors and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R5, R8, R9, R10 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R2, R3, R4 |
| 2 | 200m | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | 10K | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4,7µ | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BC817W | Package_TO_SOT_SMD:SOT-323_SC-70 | Q2 |
| 1 | Conn_01x01_Female | TestPoint:TestPoint_Pad_2.0x2.0mm | J3 |
| 1 | LOGO | theBrutzler:thebrutzler_10mm_mod | G*** |
| 1 | STSPIN220 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U1 |
It measures 15.2 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the STSPIN220, BC817 and BC817W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the theBrutzler/TinyCorePrinter repository on GitHub, at the commit this page was made from: the board is DEV_BOARDS/STP220_Polulu/STP220_Polulu.kicad_pcb and its schematic DEV_BOARDS/STP220_Polulu/STP220_Polulu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask theBrutzler before reusing the design.
stanleyondrus/LaserProjectorV2
LaserProjector V2 is a battery-powered, ESP32-based laser XY scanner using stepper motors to deflect the beam. It has auto-homing functionality, and can be controlled wirelessly (Wi-Fi & Bluetooth).
Jana-Marie/mini-motor-controller
A controller for miniature stepper motors
ISC-HEI/isc-motorbeep
ESP32 board driving two bipolar stepper motors and a speaker from 3x AA cells — a complete KiCad 9 schematic authored headlessly via MCP. ERC-clean, netlist-asserted, priced BOM.
