Skip to the content
2 layers24.8 × 14 mmPD24 ctrl, the printed circuit board in 3D

一个可以通过PD诱骗BOOST升压到24V(通过修改反馈电阻可调)输出的工具

Size
24.8 × 14 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
48
Pads
96
Tracks, vias
132, 24
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Sep 2024
Updated
29 Sep 2025

Overview

PD24 ctrl is an open-source printed circuit board by TheBadZhang, from the TheBadZhang/PD24 repository on GitHub. It is a 2-layer board of 24.8 × 14 mm with 20 parts on 48 nets, routed with 132 tracks and 24 vias.

Its parts include 9 capacitors, 3 ICs, 2 connectors and 1 resistor. It belongs with the STM32 boards of this library.

README

readme.md

PD24

PD输入24V(可调输出)升压输出模块

原理图

原理图

简单来说就是使用HUSB238诱骗PD输出20V(诱骗不到20V就以此往下诱骗,最低5V)的电压,CSD25402Q3A过流控制,然后通过MT3608升压到24V输出

哪怕完全不支持PD,也可以输出24V,不过能够提供的功率就比较有限了

保留了数控接口,可以将PD24的输入电压和总线上的电流电压传给PD24_ctrl模块,计划通过INA226读取,并在OLED上显示

2D/3D Preview

alt text alt text

实物焊接

alt text

因为没有开钢网,所以这些都是用烙铁上锡后用加热台焊接的,经常容易把控不住锡量,焊接比较难看,但是不影响功能

后话

这个模块一开始的时候因为电感没有到,所以我就直接焊上去用,结果MT3608和电感一下子就烧了,现在想想可能是因为没有焊接输出电容的原因,导致芯片震荡,最终烧掉

Parts

20
QtyValueFootprintReferences
40.1uFCapacitor_SMD:C_0402_1005MetricC6, C9, C13, C14
4TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4
21uFCapacitor_SMD:C_0402_1005MetricC7, C8
24.7uFCapacitor_SMD:C_0402_1005MetricC10, C12
12.2uFCapacitor_SMD:C_0402_1005MetricC11
1560KResistor_SMD:R_0402_1005MetricR8
1Conn_01x08_SocketConnector_PinSocket_1.27mm:PinSocket_1x08_P1.27mm_VerticalJ2
1Conn_01x12_SocketConnector_PinSocket_1.27mm:PinSocket_1x12_P1.27mm_VerticalJ1
1INA228Package_SO:VSSOP-10_3x3mm_P0.5mmU5
1STM32G031G8UxPackage_DFN_QFN:QFN-28_4x4mm_P0.5mmU2
1~my_footprint:iic_oled_12864_ssd1312_2U12
1符号Symbol:KiCad-Logo2_5mm_CopperSYMBOL1

More from TheBadZhang/PD24

1
  • 2 layers39.7 × 14 mmPD24, the printed circuit board in 3D

    PD24

    TheBadZhang/PD24

    一个可以通过PD诱骗BOOST升压到24V(通过修改反馈电阻可调)输出的工具

    34 parts

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the PD24 ctrl PCB?

It measures 24.8 × 14 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PD24 ctrl use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PD24 ctrl KiCad files?

From the TheBadZhang/PD24 repository on GitHub, at the commit this page was made from: the board is hardware/CONTROL/PD24_ctrl.kicad_pcb and its schematic hardware/CONTROL/PD24_ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PD24 ctrl design in my own project?

Its repository states no licence, so its author keeps all rights: ask TheBadZhang before reusing the design.