Skip to the content
2 layers72.6 × 64 mmGenesynth, the printed circuit board in 3D

A Sega Genesis inspired synthesizer

Size
72.6 × 64 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
55
Pads
126
Tracks, vias
168, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Jun 2018
Updated
18 Sep 2019

Overview

Genesynth is an open-source printed circuit board by theacodes, from the theacodes/genesynth repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 72.6 × 64 mm with 25 parts on 55 nets, routed with 168 tracks and 0 vias.

Its parts include 6 capacitors, 4 ICs, 3 connectors and 2 resistors. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

README

README.md

Genesynth

Genesynth is a music synthesizer module based around the Yamaha YM2612 FM Synthesis Chip, the same chip used in the Sega Genesis / Mega Drive.

Why?

Because I wanted to. :)

How?

This project is designed to use the Teensy 3.5 to control the YM2612 via USB MIDI.

More details for the hardware is available under the hardware folder, and more details on the firmware is under the firmware folder.

License

This project is under the Apache License, Version 2.0. See LICENSE for more details.

If you use anything in this for a project, please let me know! I'd love to hear what you do with it. :)

Building your own

This repository contains everything you'll need to build your own version of this synthesizer.

Parts

You'll need to order all of the components in the three separate hardware modules under the hardware directory. You can use KiCAD to generate a BOM. These parts are readily available from Mouser and other distributors with the exception of the YM2612 chip - but this is easily obtainable on ebay.

Also note that you must use a Teensy 3.5. The Teensy 3.6 will not work as it's 3.3v logic and this design uses 5v logic.

You'll also need a 9v center-positive power supply.

Ordering the PCBs

The gerbers for the PCBs are already created and are in the respective subdirectories under hardware. These are designed to fit within OSHPark's design rules, but I actually used PCBWay for my boards.

Soldering components

You should absolutely use a socket for the YM2612 and the Teensy. Otherwise, this is all standard through-hole construction. Solder the smaller parts first followed by the larger parts.

Connecting the boards.

There's three boards that make up the synth - the motherboard, a display board, and an audio board. The audio board connects to the right side of the motherboard, the display board to the left. You can connect these with wires or use pin headers and dupont connectors.

Connect audio output.

The audo board has mono line out and stereo headphone out. You'll need to wire up the appropriate jack to the right side of the audio board.

Assembling the case.

There's SVGs for creating a laser-cut case under case. You should be able to do this at any makerspace or using Ponoko. The case simply snaps together and the boards are mounted with standard M2 and M3 hardware.

Preparing and programming the Teensy

Before powering on the synthesizer, be sure to cut the USB power traces on the underside of the Teensy. If you don't do this, you will fry your board. Once connected, you can build and upload the firmware using Teensyduino.

Place patches on the SD card.

The synth needs patches on the SD card. Patches are in TFI format and many patch libraries are readily available. You should put patches into subdirectories of the SD card.

All done!

You should now be able to boot the synthesizer, load patches, and play notes over MIDI. Have fun!

Parts

25
QtyValueFootprintReferences
4100nFCapacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mmC1, C2, C5, C6
4TestPointTestPoint:TestPoint_Pad_1.5x1.5mmTP1, TP2, TP3, TP4
210uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC3, C4
22.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
1Audio DaughterboardConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ1
1Display DaughterboardConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalJ2
1LD1117S50 (Analog)Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU4
1LD1117S50 (Digital)Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU3
1LOGOGenesynth:theaG***
1LOGOGenesynth:neiG***
1POWER_JACKConnectors:POWER_JACK_PTHJ3
1Teensy3.5teensy:TeensyReducedU1
1YM2612Package_DIP:DIP-24_W15.24mmU2

The 21 most common of 25 parts.

More from theacodes/genesynth

2
  • 2 layers55.9 × 38.6 mmMega Amp, the printed circuit board in 3D

    Mega Amp

    theacodes/genesynth

    A Sega Genesis inspired synthesizer

    40 parts178Apache-2.0
  • 2 layers78.5 × 46.2 mmDisplay, the printed circuit board in 3D

    Display

    theacodes/genesynth

    A Sega Genesis inspired synthesizer

    13 parts178Apache-2.0

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Genesynth PCB?

It measures 72.6 × 64 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Genesynth use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Genesynth KiCad files?

From the theacodes/genesynth repository on GitHub, at the commit this page was made from: the board is hardware/Genesynth/Genesynth.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Genesynth design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).