2 layers66.9 × 74.5 mm
2 layers164 × 71 mm
Game32
The1CyberKing/Game32- Size
- 164 × 71 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 32
- Pads
- 83
- Tracks, vias
- 177, 19
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Dec 2025
- Updated
- 17 Aug 2026
Overview
Game32 is an open-source printed circuit board by The1CyberKing, from the The1CyberKing/Game32 repository on GitHub. It is a 2-layer board of 164 × 71 mm with 20 parts on 32 nets, routed with 177 tracks and 19 vias.
Its parts include 9 switches, 3 capacitors and 2 resistors.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 103p | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | A | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW7 |
| 1 | B | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW9 |
| 1 | Battery_Cell | Battery:2_Battery_Pads | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TH_7mm_2Pin | BZ1 |
| 1 | DOWN | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW2 |
| 1 | KEY | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW8 |
| 1 | LEFT | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW3 |
| 1 | OLED_DISPLAY | Display:YELUFT-SSD1309-2.42in | TFT1 |
| 1 | POWER_DELIVERY | Custom_Power:5V_Boost_Converter | PD1 |
| 1 | RIGHT | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW4 |
| 1 | SD_CARD_READER | Connector_Card:SD_Card_Reader_Custom | SD_READER1 |
| 1 | SELECT | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW5 |
| 1 | START | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW6 |
| 1 | UP | Button_Switch_THT:SW_Tact_2Pin_6x6x5mm | SW1 |
| 1 | ~ | Custom Devkits:ELEGOO ESP32 DevKit Type C V1 | ELEGOO_ESP1 |
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Game32 PCB?
It measures 164 × 71 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Game32 use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Game32 KiCad files?
From the The1CyberKing/Game32 repository on GitHub, at the commit this page was made from: the board is PCB Design/KiCad Files/Game32.kicad_pcb and its schematic PCB Design/KiCad Files/Game32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Game32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask The1CyberKing before reusing the design.