Skip to the content
2 layers89.7 × 99.9 mmHackpad, the printed circuit board in 3D

This Dhiaan

Size
89.7 × 99.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
30
Pads
144
Tracks, vias
185, 17
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Jun 2025
Updated
30 Jun 2025

Overview

Hackpad is an open-source printed circuit board by the-X-alien, from the the-X-alien/The-Button-Overfilled-Macropad repository on GitHub. It is a 2-layer board of 89.7 × 99.9 mm with 34 parts on 30 nets, routed with 185 tracks and 17 vias.

Its parts include 16 diodes, 16 switches, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.

README

README.md

Dhiaan's Button Overfilled Macropad

The final product in Fusion 360

image

My Schematic

image

I followed the Hackpad tutorial for the first version but after I figured out that 16 GPIO pins are too much I switched to a Matrix tutorial. I followed the tutorial but instead of a 3x3 I made a 4x4. The tutorial also explained how Anti-Ghosting worked so I also added diodes to incorperate the feature.

My PCB

image

For the PCB I did it on my own besides the OLED display for which I took help from the Hackpad chat.

The Case

image *The cover is facing the wrong way

The case was the part I thought was the hardest but ended up becoming really easy from the Hackpad tutorial. The only thing I had trouble with was finding out where to place the OLED on the top panel beacuse since we added 20 mm to each dimension.

BOM

FootprintQuantitySupplier and refPrice
Cherry MX Switches16HackclubFree
OLED Screen1HackclubFree
XIAO-RP2040-DIP1HackclubFree
Diodes16HackclubFree
Keycaps16HackclubFree
Case1#Printing-LegionFree
PCB5JLCPCB$15 (with shipping and tax)

The Firmware

(This part is exactly the Firmware's README)

How I made it

I took the starter code from the Hackpad guide and used a tutorial to make it use a matrix instead. Then I used ChatGPT to learn how to program the display.

What it does

The firmware makes the 4x4 Matrix into two parts. The top 3x4 is a numpad with 1-9 and the mulpitication and division function. The bottom is a 4 key row where the 1st (leftmost) button types my whole email out, the 2nd writes my school email out, the 3nd writes my school password out, and the 4th writes my home address which is very useful cause I always mess up on the 'Buellis' part


Parts

34
QtyValueFootprintReferences
161N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4, D5, D6, D7, D8, D9, D11, D12, D13, D14, D15, D16, D17, D18, D19
16SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16
1Conn_01x04_PinOPL:SSD1306-0.91-OLED-4pin-128x32J1
1XIAO-RP2040-DIPOPL:XIAO-RP2040-DIPU1

Similar boards

  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard old, the printed circuit board in 3D

    Amiga gfxcard old

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    34 parts1k
  • 2 layers53.5 × 62.5 mmLed matrix, the printed circuit board in 3D

    Led matrix

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    34 parts915
  • 2 layers45 × 26 mmESP32-HELP Button, the printed circuit board in 3D

    ESP32-HELP Button

    pcbreflux/espressif

    all espressif stuff will committed here

    34 parts608GPL-3.0
  • 2 layers41.7 × 25.7 mmHeadphones flex pcb rigid, the printed circuit board in 3D

    Headphones flex pcb rigid

    strangeparts/niubi-headphones

    Flexible circuit board design for adding a headphone jack to an iPhone 7

    34 parts493MIT
  • 2 layers18.8 × 16.3 mmAmoeba, the printed circuit board in 3D

    Amoeba

    mtl/keyboard-pcbs

    Keyboard PCBs

    34 parts485
  • 2 layers127 × 69.9 mmEzcgi, the printed circuit board in 3D

    Ezcgi

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    34 parts446

Questions

How big is the Hackpad PCB?

It measures 89.7 × 99.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hackpad use?

34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hackpad KiCad files?

From the the-X-alien/The-Button-Overfilled-Macropad repository on GitHub, at the commit this page was made from: the board is The-Button-Overfilled-Macropad/PCB/Hackpad.kicad_pcb and its schematic The-Button-Overfilled-Macropad/PCB/Hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hackpad design in my own project?

Its repository states no licence, so its author keeps all rights: ask the-X-alien before reusing the design.