
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Wireless blindsv2 is an open-source printed circuit board by tguyenn, from the tguyenn/home-automation repository on GitHub. It is a 2-layer board of 145 × 29.5 mm with 25 parts on 37 nets, routed with 169 tracks and 107 vias.
Its parts include 4 resistors, 4 ICs, 4 switches and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
ESP32 based home automation tools!
- Designed to meet specifications exactly dictated by commissioner
- PCB acts as connections between several modules
- Bad because form factor of modules is poorly chosen
- Bad because modules poorly chosen
- Bad because buttons are not supposed to be on this PCB- | Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 3V3 | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP3 |
| 1 | 6V | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP10 |
| 1 | Adafruit_Feather_ESP32_C6 | home-automation:Adafruit_Feather_ESP32C6 | U2 |
| 1 | CHG | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP6 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | DWN | home-automation:SW_PUSH_6mm_value | SW3 |
| 1 | GND | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP9 |
| 1 | ON | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP8 |
| 1 | OPN | home-automation:SW_PUSH_6mm_value | SW2 |
| 1 | PGOOD | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP5 |
| 1 | PWM | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP1 |
| 1 | RST | home-automation:SW_PUSH_6mm_value | SW1 |
| 1 | UP | home-automation:SW_PUSH_6mm_value | SW4 |
| 1 | USBV | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP4 |
| 1 | VBAT | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP2 |
| 1 | nRST | home-automation:TestPoint_Pad_1.5x1.5mm_but_better | TP7 |
| 1 | ~ | home-automation:Pololu_U3V40F6_Module | U4 |
| 1 | ~ | home-automation:Pololu_2810_Module | U3 |
| 1 | ~ | home-automation:BQ24074 Module | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 145 × 29.5 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tguyenn/home-automation repository on GitHub, at the commit this page was made from: the board is wireless-blindsv2/wireless-blindsv2.kicad_pcb and its schematic wireless-blindsv1/wireless-blindsv1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tguyenn before reusing the design.