2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers40.6 × 43.2 mm
Atmoshpheresensor3.0
tgobrien1/envmon-pcb1- Size
- 40.6 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 23
- Pads
- 53
- Tracks, vias
- 89, 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Feb 2022
- Updated
- 5 Feb 2022
Overview
Atmoshpheresensor3.0 is an open-source printed circuit board by tgobrien1, from the tgobrien1/envmon-pcb repository on GitHub. It is a 2-layer board of 40.6 × 43.2 mm with 9 parts on 23 nets, routed with 89 tracks and 2 vias.
It is built around the BME280. Its parts include 4 resistors, 3 connectors and 1 transistor. It belongs with the ESP8266 boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 12K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 3K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | Adafruit_HUZZAH_ESP8266_breakout | KiCADstuff:XCVR_ADA2471 | A1 |
| 1 | BME280 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | MiCS5524 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
Questions
How big is the Atmoshpheresensor3.0 PCB?
It measures 40.6 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atmoshpheresensor3.0 use?
9 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atmoshpheresensor3.0 KiCad files?
From the tgobrien1/envmon-pcb repository on GitHub, at the commit this page was made from: the board is Atmospheresensor3.0/Atmoshpheresensor3.0.kicad_pcb and its schematic Atmospheresensor3.0/Atmoshpheresensor3.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atmoshpheresensor3.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tgobrien1 before reusing the design.
Similar boards
- 4 layers38.6 × 39.5 mm
- 4 layers35.1 × 76.3 mm
Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
90 parts96CERN-OHL-W-2.0 - 2 layers29.8 × 33.7 mm
- 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 4 layers36.6 × 60.3 mm
StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
85 parts43 - 2 layers23 × 50 mm
- 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37