

Power Module
Dit is een repo voor het APPS project
- Size
- 35 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 32
- Pads
- 112
- Tracks, vias
- 318, 55
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Feb 2025
- Updated
- 20 Jan 2026
Overview
Power Module is an open-source printed circuit board by teunrensing, from the teunrensing/APPS_S6_25 repository on GitHub. It is a 2-layer board of 35 × 60 mm with 37 parts on 32 nets, routed with 318 tracks and 55 vias.
It is built around the MIC2288YD5-TR and MIC5504-3.3YM5. Its parts include 13 resistors, 8 diodes, 6 capacitors, 6 ICs and 2 connectors.
Main components
2MIC2288YD5-TR
TSOT-23-5-40℃~+125℃ 1 1.2MHz 1A 2.5V~10V 34V 5mA Adjustable Boost Boost Built-in No TSOT-23-5 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersMIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 634 | Capacitor_SMD:C_0402_1005Metric | R1, R7, R8, R9, R10, R11, R12 |
| 7 | LED | LED_SMD:LED_0402_1005Metric | D1, D2, D3, D4, D5, D6, D7 |
| 3 | 10KΩ | Resistor_SMD:R_0603_1608Metric | R4, R6, R13 |
| 2 | 10uF 6.3V | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 4.7uF 6V | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 1 | 1.87KΩ | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1814951 | Library:1814951 | J2 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 4.7uH 650mA | Capacitor_SMD:C_1210_3225Metric | L1 |
| 1 | 5.62KΩ | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | B2B-PH-K-SLFSN | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | MBRM140T3G | Diode_SMD:D_SOD-123 | D8 |
| 1 | MCP3021A2T-E/OT | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | MCP73832-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MIC2288YD5-TR | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | PCA6408APW_118 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | ~ | Package_SO:TSSOP-8_3x3mm_P0.65mm | U4 |
More from teunrensing/APPS_S6_25
2- 4 layers75 × 80 mm

- 2 layers70 × 55 mm

Similar boards
- 2 layers79.7 × 80 mm

Mainboardv1.2
doobedoobedo/Huebner_Inverter
KiCAD port of https://github.com/jsphuebner/inverter-hardware mainboard V1.2
133 parts1 - 2 layers335 × 300 mm

- 2 layers68 × 35.3 mm

- 4 layers160 × 100 mm

OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts - 2 layers74.1 × 112 mm

- 4 layers56 × 38 mm

- 2 layers172 × 152.9 mm

- 2 layers22.9 × 36.7 mm

Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152
Questions
How big is the Power Module PCB?
It measures 35 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power Module use?
37 parts, built around the MIC2288YD5-TR and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Module KiCad files?
From the teunrensing/APPS_S6_25 repository on GitHub, at the commit this page was made from: the board is Hardware/Power_Module/Power_Module.kicad_pcb and its schematic Hardware/Buttons_Displays_ESP32/Buttons_Displays_ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask teunrensing before reusing the design.