
I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs

MASIC VGA adapter schematics and PCB
Vga is an open-source printed circuit board by tetrix450, from the tetrix450/masic-vga repository on GitHub, published under the MIT licence. It is a 2-layer board of 190 × 100 mm with 64 parts on 199 nets, routed with 3,087 tracks and 117 vias.
It is built around the 74LS273PC, 74HC273D and 74LS30PC, with the 74LS00SC, 74LS04PC and 74LS10PC among its other parts. Its parts include 31 capacitors, 27 ICs, 3 resistors, 2 connectors and 1 crystal.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100n | cpu_pcb:C_Disc_7.62mm | C1, C2, C10, C11, C12, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +11 |
| 5 | 74LS273 | Package_DIP:DIP-20_W7.62mm | U1, U2, U10, U11, U12 |
| 3 | 10u | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | C13, C30, C31 |
| 3 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5, R6 |
| 3 | 74HC273 | Package_DIP:DIP-20_W7.62mm | U3, U26, U27 |
| 3 | 74LS30 | Package_DIP:DIP-14_W7.62mm | U4, U15, U25 |
| 2 | 4040 | Package_DIP:DIP-16_W7.62mm | U7, U9 |
| 2 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U8, U13 |
| 2 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U5, U24 |
| 2 | 74LS10 | Package_DIP:DIP-14_W7.62mm | U6, U20 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U22, U23 |
| 2 | IDT7134 | Package_DIP:DIP-48_W15.24mm | U16, U17 |
| 1 | 1u | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | C14 |
| 1 | 74LS157 | Package_DIP:DIP-16_W7.62mm | U21 |
| 1 | 74LS166 | Package_DIP:DIP-16_W7.62mm | U19 |
| 1 | 74LS20 | Package_DIP:DIP-14_W7.62mm | U14 |
| 1 | AT28C64 | Package_DIP:DIP-28_W15.24mm | U18 |
| 1 | CXO_DIP8 | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | Conn_02x20_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | DE15_Receptacle_HighDensity | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm | J2 |

felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs

ksr/YACC1-D
YACC1 (Yet Another Custom CPU) - definitive tree: hardware, firmware, software, tools and docs for the hand-built TTL computer. Supersedes ksr/YACC1-2020.

CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.

RetroStack/TRS-80-Model-I-Expansion-Interface-Rev-D
Hardware Replica of the TRS-80 Model I Expansion Interface - Revision D



schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

It measures 190 × 100 mm and has 2 copper layers, 1.6 mm thick.
64 parts, built around the 74LS273PC, 74HC273D, 74LS30PC and 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tetrix450/masic-vga repository on GitHub, at the commit this page was made from: the board is vga.kicad_pcb and its schematic decodificador.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).