

Add
KiCAD data
- Size
- 72 × 72 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 74
- Pads
- 214
- Tracks, vias
- 357, 65
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Add is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 72 × 72 mm with 46 parts on 74 nets, routed with 357 tracks and 65 vias.
It is built around the 74AHCT541D and 74HC86D. Its parts include 10 resistors, 10 diodes, 8 capacitors, 7 ICs and 4 connectors.
Main components
274AHCT541D
SO-20-300mil-40℃~+125℃ 4.5V~5.5V 5ns@5V,50pF 74AHCT 8 80uA 8mA 8mA Schmitt trigger Tri-State SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74HC86D
SO-14-40℃~+125℃ 1.5V~4.2V 20ns@6V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series XOR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 10 | R_Small | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 3 | , , | ||
| 3 | 74AHCT541 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U3, U4, U5 |
| 3 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 74HC86 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6, U7 |
| 2 | ~ | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
The 42 most common of 46 parts.
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 4 layers324.3 × 185.6 mm

- 4 layers160 × 100 mm

- 4 layers109 × 75.5 mm

Arty scope expansion board
Filip-Kubecki/arty-scope-expansion-board
Two-channel oscilloscope analog front-end shield for Arty A7 (KiCad)
138 parts - 4 layers36.7 × 41 mm

- 4 layers50.8 × 106.6 mm

- 4 layers50.8 × 87 mm

- 4 layers222.1 × 158.1 mm

Zx50 Bus Probe RevA
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
72 parts - 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326
Questions
How big is the Add PCB?
It measures 72 × 72 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Add use?
46 parts, built around the 74AHCT541D and 74HC86D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Add KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is alu/add/add.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Add design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.