

PowerSwitch
Multimedia center with DAB/FM radio
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 31
- Pads
- 91
- Tracks, vias
- 177, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Sep 2017
- Updated
- 20 Sep 2017
Overview
PowerSwitch is an open-source printed circuit board by terjeio, from the terjeio/MultimediaCenter repository on GitHub. It is a 2-layer board of 40 × 40 mm with 25 parts on 31 nets, routed with 177 tracks and 0 vias.
Its parts include 9 connectors, 3 capacitors, 3 resistors, 2 ICs and 1 diode. It belongs with the MSP430 boards of this library.
README
README.mdMultimedia center with DAB/FM radio
Features:
High quality (IMO) pre-amp board with I2C control of inputs and VCA based volume control.
5 line inputs, one may be fitted with an internal RIAA-preamp (phono, for moving magnet cartridges). 2 line outputs with old-style tape copy function and post listening possible.
Power amplifier on/off switching via inbuilt relay river.
KeyStone DAB/FM-module may be fitted.
Custom Raspberry PI power switch with PC-style startup/shutdown, may be controlled over I2C or from a front panel button. Has "breakout" socket for internal USB HDD.
IR Remote Control - RC5 protocol: for input selection, volume control and UI controller navigation.
Main controller built around a Texas Instruments Tiva C MPU, custom UI library with support for KeyStone radio-module.
Raspberry PI for media playback (via Kodi), in my configuration audio is fed via HDMI to a TV and then to a DAC mounted inside the pre-amp cabinet.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitors_SMD:C_1206 | C1 |
| 1 | 10uF | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | C2 |
| 1 | 1K2 | Resistors_SMD:R_1206 | R1 |
| 1 | 1N4148 | Diodes_SMD:SOD-123 | D1 |
| 1 | 1nF | Capacitors_SMD:C_1206 | C3 |
| 1 | 2N7002 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | Q1 |
| 1 | 47K | Resistors_SMD:R_1206 | R3 |
| 1 | 4K7 | Resistors_SMD:R_1206 | R2 |
| 1 | FRONT PANEL | Pin_Headers:Pin_Header_Straight_1x04 | P6 |
| 1 | Ferrite bead | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | L1 |
| 1 | I2C 1 | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | I2C 2 | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
| 1 | MIC5209 3V3 | AB2_SOT:AB2_SOT223 | U1 |
| 1 | MSP430G2553-20 | Engineering_Conn:TSSOP20 | U2 |
| 1 | PI INTERFACE | Pin_Headers:Pin_Header_Straight_1x05 | P5 |
| 1 | PI USB | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | PWR 1 | Engineering_Conn:CONN_PWR_3P | P8 |
| 1 | PWR 2 | Pin_Headers:Pin_Header_Straight_1x02 | P9 |
| 1 | RELAY-LD-P | Engineering_Conn:PANASONIC_LD_P_RELAY | K1 |
| 1 | SBW | Pin_Headers:Pin_Header_Straight_1x03 | P7 |
| 1 | USB_A_2 | Engineering_Conn:USB_A_2 | P1 |
The 21 most common of 25 parts.
More from terjeio/MultimediaCenter
2- 2 layers175 × 86 mm

- 2 layers75 × 60 mm

Similar boards
- 2 layers159.5 × 30 mm

Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
25 parts3kApache-2.0 - 2 layers113.5 × 95.1 mm

Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
25 parts2.1k - 2 layers75 × 30 mm

- 2 layers58.4 × 114.3 mm

PicoPedal
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
25 parts915 - 2 layers54 × 15 mm

Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 2 layers50 × 76 mm

- 2 layers237.5 × 102.9 mm

Storage
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
25 parts301Unlicense - 2 layers43.3 × 21 mm

Questions
How big is the PowerSwitch PCB?
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerSwitch use?
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerSwitch KiCad files?
From the terjeio/MultimediaCenter repository on GitHub, at the commit this page was made from: the board is Electronics/PowerSwitch/PowerSwitch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerSwitch design in my own project?
Its repository states no licence, so its author keeps all rights: ask terjeio before reusing the design.