2 layers48.3 × 26.7 mm
DB192IDC20
terenceang/DB192IDC20
A adapter for connecting a Apple UniDisk to an Apple Drive II card.
2 parts8Unlicense
2 layers36.8 × 41.9 mm
DISK2BREAKOUT
terenceang/DB192IDC208A adapter for connecting a Apple UniDisk to an Apple Drive II card.
- Size
- 36.8 × 41.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 15
- Pads
- 56
- Tracks, vias
- 84, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Mar 2022
- Updated
- 8 Mar 2022
Overview
DISK2BREAKOUT is an open-source printed circuit board by terenceang, from the terenceang/DB192IDC20 repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 36.8 × 41.9 mm with 6 parts on 15 nets, routed with 84 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdDB192IDC20
A adapter for connecting a Apple UniDisk to an Apple Drive II card
A small adpater to connect an Apple UniDisk with an DB19 connector to a Apple Drive II interface card. I only using this for an Apple II+, so there is no switching or any kind of drive detection circuits, just a straight pin to pin connection.
Parts.
- 3D printed shell (Resin Print)
- DB25F (for harvesting the pins)
- IDC20 connector
- PCB
Note. the shell is resin printed with Siraya Tech Blu.
Note. the shell is resin printed with Siraya Tech Blu.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | APPLE II Disk | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J1, J2 |
| 1 | 12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
More from terenceang/DB192IDC20
1Similar boards
- 2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT - 2 layers14.6 × 33 mm
- 2 layers9 × 9 mm
Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm
MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm
Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm
Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm
L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm
Questions
How big is the DISK2BREAKOUT PCB?
It measures 36.8 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DISK2BREAKOUT use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DISK2BREAKOUT KiCad files?
From the terenceang/DB192IDC20 repository on GitHub, at the commit this page was made from: the board is PCB/DISK2BREAKOUT/DISK2BREAKOUT.kicad_pcb and its schematic PCB/DB192IDC20/DB192IDC20.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DISK2BREAKOUT design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).