Skip to the content
2 layers38 × 47.5 mmEsp-32Dashboard, the printed circuit board in 3D
Size
38 × 47.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
24
Pads
48
Tracks, vias
63, 6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Apr 2026
Updated
10 Aug 2026

Overview

Esp-32Dashboard is an open-source printed circuit board by teocza-111, from the teocza-111/esp-32Dashboard repository on GitHub. It is a 2-layer board of 38 × 47.5 mm with 5 parts on 24 nets, routed with 63 tracks and 6 vias.

Its parts include 2 resistors, 2 connectors and 1 IC. It belongs with the ESP32 boards of this library.

README

README.md

Overview

An esp-32 based dashboard with a 4.2" e-ink display from waveshare.

Why?

Its main purpouse is just sitting on a desk and looking nice, nothing much besides that.

Features

  • Displaying current spotify playing song
  • Time and date
  • Weather
  • [WIP]

Part List

  • Seeed Studio Xiao ESP32-S3 Plus
  • Waveshare 4.2" e-ink display
  • 4000mAh li-po
  • 2 * 100kOhm Resistors
  • JST-BEC female connector
  • Male and female pin headers 8x2.54mm

Firmware

Uploading the firmware is simple enough, open the .ino file in Arduino IDE and upload it into your Esp32

Media

Schematics & PCB

sch PCB

Renders

PCB V0 assembly

Bill of materials

NamePurposeQuantityTotal Cost (USD)LinkDistributor
JST-PH 2.0 FemaleConnecting the battery to the mcu10.00N/AMe
100kOhm ResistorsSafely reading the volatage of the battery20.00N/AMy resistor kit
4000mAh li-po batteryThe power source114.20https://pl.aliexpress.com/item/1005009212214659.htmlAliExpress
Seeed Studio Xiao ESP32-S3 PlusMCU114.29https://pl.aliexpress.com/item/1005008329745247.htmlAliExpress
Waveshare 4.2" e-ink displayThe display135.15https://pl.aliexpress.com/item/1005012036132680.htmlAliExpress
PCBIt's... Well a PCB110.00https://jlcpcb.comJLCPCB
Male pin headersConnecting the display to the pcb11.04https://pl.aliexpress.com/item/1005012870954370.htmlAliExpress
Female pin headersConnecting the display to the pcb13.55https://pl.aliexpress.com/item/1005003610333849.htmlAliExpress
TOTALCOST IN USD78.23

Parts

5
QtyValueFootprintReferences
2RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1JST-BECConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1XIAO-ESP32-S3-SMDNew_XIAO_Series_Footprints:XIAO-ESP32-S3-Plus-SMDU1

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Esp-32Dashboard PCB?

It measures 38 × 47.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp-32Dashboard use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp-32Dashboard KiCad files?

From the teocza-111/esp-32Dashboard repository on GitHub, at the commit this page was made from: the board is KiCad files/ESP-32Dashboard.kicad_pcb and its schematic KiCad files/ESP-32Dashboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp-32Dashboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask teocza-111 before reusing the design.