
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

My PCB business card redesigned from the ground up with an NFC and a clever eye-blinking LED!
SaxCard V2 is an open-source printed circuit board by tenorangesax, from the tenorangesax/SaxCard-V2TM repository on GitHub. It is a 2-layer board of 88.9 × 50.8 mm with 33 parts on 5 nets, routed with 269 tracks and 1 via.
Its parts include 1 capacitor, 1 resistor and 1 diode.
**Today I wanted to make a PCB business card but really detailed. So I decided to make a PCB buisness card with just a lot of design! (so I guess I got a little more familiar with aesthetics in Kicad)
I wanted to have a more cool, tech look, so I put traces and chips and used all layers to make the card!
I had to censor some stuff since I'm not comfortable with giving out my personal info.
I did a lot of research before hand for how to make a functioning one, but I got fed up and decided to just give up on that and spend a lot of time designing it.
I put the stuff I liked and tried different combos till i got it right.**
FINAL PRODUCT:
SCHEMATIC:
PCB DESIGN:
FOOTPRINTS:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 1 | SML0805_259 | LED1 | |
| 1 | 220 nf | C0603_348 | C1 |
| 1 | 25X48MM_NFC_ANTENNA | 25X48MM_NFC | ANT0 |
| 1 | 47 Ω | R0603_348 | R1 |
| 1 | NT3H | XQFN8 | NT3H1101 |
The 18 most common of 33 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 88.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tenorangesax/SaxCard-V2TM repository on GitHub, at the commit this page was made from: the board is PRODUCTION/SaxCard V2.kicad_pcb and its schematic PRODUCTION/SaxCard V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tenorangesax before reusing the design.