2 layers47.5 × 31 mm
2 layers160 × 16 mm
Nuno flex
tendots/nuno3Electric fabric touchpad "nüno"
- Size
- 160 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 10
- Pads
- 26
- Tracks, vias
- 32, 0
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Jul 2018
- Updated
- 14 May 2021
Overview
Nuno flex is an open-source printed circuit board by tendots, from the tendots/nuno repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 160 × 16 mm with 17 parts on 10 nets, routed with 32 tracks and 0 vias.
README
README.mdnuno
Electric fabric touchsensor module "nüno"
導電布タッチセンサーモジュールnünoのコードです。
質問や要望などあればこのページかFacebookページへご連絡ください。
仕様
- 静電容量タッチセンサ mtch6102
- タッチチャンネル数8
- コネクタ GROVEコネクタ(I2C)
導線部接続方法
導線部（細長い方）は画像のように、縫い目がセンサー部（四角い方）の外縁に向くように接続してください。 逆につけた取り付けた場合、すべてのチャンネルの値が取得できません。
フレキシブル基板コネクタ接続方法
フレキシブル基板のコネクタは、リジット基板のFPCコネクタに接続後、 画像のようにフレキシブル基板と布を両方挟み込むようにして、 付属の固定具でネジ止めしてください。
付属ケースカット方法
参考
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | HOCK | myLibrary:Hock_4mm | J1, J2, J3, J4, J5, J6, J7, J8 |
| 1 | Conn_01x10 | myLibrary:FPP_CONN_10 | J10 |
The 9 most common of 17 parts.
More from tendots/nuno
1Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the Nuno flex PCB?
It measures 160 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nuno flex use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nuno flex KiCad files?
From the tendots/nuno repository on GitHub, at the commit this page was made from: the board is KiCad/Conductor-part/nuno-flex.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nuno flex design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).