Skip to the content
4 layers20.3 × 46 mmPCIEX1-SMA, the printed circuit board in 3D

Low-cost PCIe x1 to SMA adapter

Size
20.3 × 46 mm
Copper layers
4
Thickness
1.6 mm
Parts
10
Nets
26
Pads
74
Tracks, vias
168, 8
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Sep 2021
Updated
28 Oct 2021

Overview

PCIEX1-SMA is an open-source printed circuit board by teknoman117, from the teknoman117/PCIEX1-SMA repository on GitHub. It is a 4-layer board of 20.3 × 46 mm with 10 parts on 26 nets, routed with 168 tracks and 8 vias.

Its parts include 8 connectors, 1 resistor and 1 diode. It belongs with the computers and single-board computers and interfaces and adapters boards of this library.

README

README.md

PCIEX1-SMA

Adapts a PCIe x1 slot into 6 SMA connectors (REFCLK, TX, and RX differential pairs), and a pin header for SMBUS and the PERST signal. This is intended to be the one of the lowest cost SMA adapter boards for PCIe x1.

Imagined use case is adapting the Crosslink-NX Evaluation Board into a PCIe capable board by installing the missing SMA connectors and providing an adapter board to an actual PCIe connector.

Picture

License

CC-BY-SA 4.0

Assembled

Assembled FPGA Linkup

Parts

10
QtyValueFootprintReferences
12K2Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1PCIEX1Connector_PCBEdge:BUS_PCIexpress_x1J1
1PowerLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1
1REFCLK+Connector_Coaxial:SMA_Amphenol_132134_VerticalJ5
1REFCLK-Connector_Coaxial:SMA_Amphenol_132134_VerticalJ7
1RX+Connector_Coaxial:SMA_Amphenol_132134_VerticalJ4
1RX-Connector_Coaxial:SMA_Amphenol_132134_VerticalJ6
1SidebandConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1TX+Connector_Coaxial:SMA_Amphenol_132134_VerticalJ2
1TX-Connector_Coaxial:SMA_Amphenol_132134_VerticalJ3

Similar boards

  • 4 layers22 × 42 mmLatest, the printed circuit board in 3D

    Latest

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    10 parts397Apache-2.0
  • 4 layers28 × 70 mmDSC DB9 Splitter, the printed circuit board in 3D

    DSC DB9 Splitter

    nanographs/Open-Beam-Interface

    Just what you need to control the beam and get an image.

    10 parts371
  • 4 layers59 × 23 mmSma probetarget, the printed circuit board in 3D

    Sma probetarget

    azonenberg/starshipraider

    Open hardware test equipment

    10 parts193BSD-3-Clause
  • 4 layers47.9 × 47.9 mmFlashCardBanked2M, the printed circuit board in 3D

    FlashCardBanked2M

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    10 parts150
  • 4 layers32 × 50 mmJ533DreamPCB, the printed circuit board in 3D

    J533DreamPCB

    lukasloetkolben/OpenpilotHardware

    Welcome to the Openpilot Hardware Collection!

    10 parts95MIT
  • 4 layers118.1 × 68.6 mmNucleo-144-click shield, the printed circuit board in 3D

    Nucleo-144-click shield

    COVESA/Open1722

    Open-source implementation of the IEEE 1722 protocol, for streaming audio/video, tunneling CAN/LIN messages and enabling remote access to peripherals

    10 parts86BSD-3-Clause
  • 4 layers72 × 40.2 mmThelio io sata, the printed circuit board in 3D

    Thelio io sata

    system76/thelio-io-hardware

    KiCad electrical design of Thelio Io board

    10 parts70GPL-3.0
  • 4 layers60.9 × 34.2 mmVIA2Expansion, the printed circuit board in 3D

    VIA2Expansion

    RetroRemake/OtterX

    8-Bit computer compatible with Commander X16

    10 parts40CERN-OHL-W-2.0

Questions

How big is the PCIEX1-SMA PCB?

It measures 20.3 × 46 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PCIEX1-SMA use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCIEX1-SMA KiCad files?

From the teknoman117/PCIEX1-SMA repository on GitHub, at the commit this page was made from: the board is PCIEX1-SMA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCIEX1-SMA design in my own project?

Its repository states no licence, so its author keeps all rights: ask teknoman117 before reusing the design.